Hi ,
I was trying to set up Intel XL710 in 2x40 mode using the QCU but I am getting the error ""QSFP+ Configuration modification is not supported by this adapter."
Although If I try to check the current configuration it shows the mode as N/A.
All the steps that I followed:
[root@ndr730l:/tmp/EFIx64] ./qcu64e /devices
Intel(R) QSFP+ Configuration Utility
QCU version: v2.27.10.01
Copyright(C) 2016 by Intel Corporation.
Software released under Intel Proprietary License.
NIC Seg:Bus Ven-Dev Mode Adapter Name
=== ======= ========= ======= ==================================================
1) 000:005 8086-1583 N/A Intel(R) Ethernet Converged Network Adapter XL710-
[root@ndr730l:/tmp/EFIx64] ./qcu64e /info /nic=1
Intel(R) QSFP+ Configuration Utility
QCU version: v2.27.10.01
Copyright(C) 2016 by Intel Corporation.
Software released under Intel Proprietary License.
QSFP+ Configuration modification is not supported by this adapter.
MAC Address: 3CFDFE16FE80
Serial Number: XL710QDA2BLK
Firmware details:
ethtool -i vmnic4
driver: i40e
version: 1.4.28
firmware-version: 5.04 0x800024d8 17.5.10
bus-info: 0000:05:00.0
