Omni-Path HFI Silicon 100 Series State: Initializing Physical state: LinkUp

Port State stays in Initializing state and not getting active

Omni-Path HFI Silicon 100 Series State: Initializing Physical state: LinkUp

# ibstat

CA 'hfi1_0'

        CA type:

        Number of ports: 1

        Firmware version:

        Hardware version: 11

        Node GUID: 0x00117501017bf382

        System image GUID: 0x00117501017bf382

        Port 1:

                State: Initializing

                Physical state: LinkUp

                Rate: 100

                Base lid: 0

                LMC: 0

                SM lid: 0

                Capability mask: 0x00410020

                Port GUID: 0x00117501017bf382

                Link layer: InfiniBand

#

4: ib0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 2044 qdisc pfifo_fast state DOWN qlen 256

    link/infiniband 80:00:00:02:fe:80:00:00:00:00:00:00:00:11:75:01:01:7b:f3:82 brd 00:ff:ff:ff:ff:12:40:1b:80:00:00:00:00:00:00:00:ff:ff:ff:ff

    inet 10.100.0.3/8 brd 10.255.255.255 scope global ib0

       valid_lft forever preferred_lft forever