Hi all,
i not found answer for my problem. Option ROM iSCSI do not promt "Ctrl+D" Before Motreboard UEFI BIOS. I can't enter in it.
My Motreboard is :
I plug my nic en PCI-E x8 in Black port
So, my nic is Gigabit ET dual port on PCI-E x4 (E1G42ETBLK). I do not locate serial.
ID PCI is PCI\VEN_8086&DEV_10C9&SUBSYS_A04C8086&REV_01
PS C:\Intel20.1\APPS\BootUtil\Winx64> .\BOOTUTILW64E.EXE -nic 2
Intel(R) Ethernet Flash Firmware Utility
BootUtil version 1.5.54.1
Copyright (C) 2003-2015 Intel Corporation
bootpriority=primary
initiatorname=iqn.2015-5.my.domain:mypc
initiatordhcp=disable
expansionrommenu=enable
connwaittime=30
initiatorip=172.16.0.55
netmask=255.255.255.0
gateway=0.0.0.0
iscsivlan=0
targetname=iqn.2015-5.my.domain.mon:RAID5.thin3.vg0.windows
targetdhcp=disable
targetip=172.16.0.2
targetport=3260
bootlun=0
authenticationmethod=none
chapusername=
chapsecret=
mutualchapsecret=
Port Network Address Location Series WOL Flash Firmware Version
==== =============== ======== ======= === ============================= =======
1 A0369F0F139C 3:00.0 Gigabit NO FLASH Disabled
2 A0369F0F139D 3:00.1 Gigabit NO UEFI,PXE,iSCSI Primary 2.7.88
Actualy, there is no driver for Windows 10. I refactory inf file with NDIS63 driver. Essentials features work fine on Win10. I not use VLAN tab.
Regards