Lanconf crossover MDI-X
Hi All, I was trying to test 100base T in Mdix mode,however Lanconf doesn't support MDI-x directly,looks like phy register has to be modified in order to get signal in mdix mode. Does anybody know how...
View ArticleX710 L2 filter packet steering
Hello,I am trying to use the x710 MAC/VLAN filtering option to steer packets to receive queues based on strict MAC address match.I need to filter and steer around 100 MAC addresses to 8 receive...
View ArticleClik here to view.
IEEE 1588 hardware implementation.
I am designing a system that will use the x550. I want to have the future possibility of IEEE 1588 precision time protocol. The SDP (software defined pins) of the x550 will be connected to an FPGA...
View ArticleClik here to view.
x710 firmware update
I have trouble updating firmware for X710DA4 card.This card drops connection at random with Linux 4.9.9 driver.The driver requires firmware update. But I tried all three versionsat Intel website and...
View ArticleX550 Driver for Windows 10 (10.0.14393) WOL (Wake on LAN) not working
When I install the driver ver 21.1 Download Intel® Network Adapter Driver for Windows® 10 I get a message "Important Note: Creating Intel® ANS teams and VLANs on Microsoft Windows® 10 is currently...
View ArticleClik here to view.
I211/I217-V Windows 10 LACP teaming fails
Hello, after the update to Windows 10 (x64, Build 10240) the creation of a teaming group (static or IEEE802.3ad) with a I211+I217-V NIC fails. Drivers have been upgraded to the latest version available...
View ArticleClik here to view.
i210-AT magnetic-less
Hello, I would like to use the i210-AT as part of a 1000BASE-T backplane design. I have a plug-able network switch with on-board magnetics and would like to interface to an i210-AT without adding an...
View ArticleVLAN adapter not working after reboot - Win10, 22.0.1
Following all the events at I211/I217-V Windows 10 LACP teaming fails and networking - USB to Ethernet adapter supporting multiple virtual LANs - Hardware Recommendations Stack Exchange, we now have an...
View ArticleWhere to download NVM update 5.51 for XXV710 ?
The link to latest is 5.05, looking for 5.51 recommended for XVV710.
View ArticleClik here to view.
How do I enable rx-fcs and rx-all for Intel Corporation 82599ES 10-Gigabit...
Currently, I have the following: # ethtool -k p1p2Features for p1p2:rx-checksumming: ontx-checksumming: on tx-checksum-ipv4: on tx-checksum-ip-generic: off [fixed] tx-checksum-ipv6: on...
View ArticleClik here to view.
No Intel(r) Adapters are present in this computer
Windows 8.1 Enterprise 64 bit editionASRock QC 5000 ITX MainboardIntel Desktop CT GBe PCIe adapter Using Proset release 21 The OS will automatically detect and bring the card up. What I'm needing in...
View ArticleProgramming i210 Blank Flash w/ EEUPDATE & LANConf
Greetings, I'm following the directions from document 513655. Running EEUPDATE shows my two i210 controllers (one working, and one blank). Using both EEUPDATE & LANConf to attempt to program the...
View ArticleClik here to view.
Re: VLAN adapter not working after reboot - Win10, 22.0.1
Hi all, Same problem here. One tagged VLAN (6) and untagged VLAN. After every reboot the untagged VLAN doesn't work until I disable and re-enable the Untagged VLAN virtual adapter. The VLAN6 doesn't...
View ArticleHow do setup MAC loopback on 82599EB
Hi, I'd like to setup MAC loopback for a NIC interface? I attempted to modify (IXGBE) linux kernel driver to setup the loop back. Apparently, the kernel crashes with Tx hang detected with timeout.The...
View Article82599ES 10-Gigabit connected to 1G port
I have a 10G 82599ES intel card on Ubuntu 14.04.5 LTS , details below :description: Ethernet interfaceproduct: 82599ES 10-Gigabit SFI/SFP+ Network Connectionvendor: Intel Corporationphysical id: 0bus...
View Articleigb Detected Tx Unit Hang
Hi all experts : we are using the Intel I350AM2 ( Two GE Ports ) chip to interface the Cortex-A8 SoC from TI through PCIE x 2 bus .The OS version is Linux 2.6.37The I350 driver version is 5.0.6and...
View ArticleLatest Intel Network Connections versions - NCS2Prov.exe constantly...
Platform is a Dell E6520 LatitudeNIC is the Intel 82579LM GigEWindows 7 Enterprise x64, fully patched and up to dateDrivers are the latest available from the Intel site. After updating to the latest...
View ArticleXL710 can't split in FreeBSD
Hello.Trying to split XL710QDA1 in FreeBSD 12 and get: [root@host ~]# ./qcu64e /devices...
View ArticleClik here to view.
82576 Gigabit Ethernet: Enabling MPE bit causes Unknown Unicast to accept
Hi, We are using 82576 Gigabit Ethernet Controller, as per the document (8.10.1 Receive Control Register - RCTL (0x00100; R/W), page No. 515) attached and also the ethtool output, - Even if the UPE...
View ArticleWhere to download NVM update 5.51 for XXV710 ?
The link to latest is 5.05, looking for 5.51 recommended for XVV710.
View Article