Clik here to view.
Customer Requirement: To implement VF RSS using ixgbevf driver. Customer...
Customer Requirement: To implement VF RSS using ixgbevf driver. Customer wants to know how to turn on RSS support on ixgbevf. Customer Observation:Using 3.3.2 ixgbevf in guest and 5.0.4 ixgbe on...
View ArticleClik here to view.
Will X710 firmware update 4.53 to 5.05 address sporadic transmit queue timeout?
We have experienced three occurrences on two servers of this error "tx_timeout" / "hung_queue", and packets stopped flowing for some number of seconds (but then recovered): Apr 10 02:04:14 node39...
View ArticleClik here to view.
QSFP+ Configuration modification is not supported by this adapter for XL710 QDA2
Hi ,I was trying to set up Intel XL710 in 2x40 mode using the QCU but I am getting the error ""QSFP+ Configuration modification is not supported by this adapter."Although If I try to check the current...
View Articlewindows 10 Dell Optiplex 755 Intel 82566DM Ipv4 not connected
I can't get connected to the internet. I get the message not connected. Connection on other computers working fine. I think it started when I tried to updat the driver. Intel says adapter not supported...
View ArticleCan I use Direct Cable when connecting PC to PC?
When connecting PC and PC directlyIn general, a cross cable is used. I saw a PC to PC connection via a direct cable.We confirmed that the ping test works normally. There seems to be a separate LAN...
View ArticleDeployment Drivers Missing DEV_15D8
Hi. When deploying to the new 5th Gen Lenovo X1 Carbon, I keep getting an error stating that the network driver isn't installed - please see below:pci...
View Article802.1ad on ixgbe vfs
Hi,I am trying to configure 802.1ad on ixgbe vfs with a goal of moving resultant q-in-q interface into a container i.e. have the vf in default namespace and have all the vf's vlan interfaces being...
View ArticleClik here to view.
I210 BCM5241: Link to BCM PHY works, no link from PHY to I210
We have a simple on board I210 in copper 10/100 mode connected to a BCM5241 PHY. The BCM PHY sees link at 100M from the I210, but the I210 cannot see link from the BCM PHY. So, TX from the I210...
View ArticleRe: Deployment Drivers Missing DEV_15D8
Dear Intel Corporation, I still have no solution. HP doesn't provide correct drivers. Can't Intel create PXE-drivers? We have the devices now almost a month and have to install it one by one. This is...
View ArticleX710 - VFs - TX driver issue detected, PF reset issued, when running iperf3
Hi, * In summary:When I run iperf3 between 2 machines throgh SRIO VFs interface and I got the following error in dmesg: TX driver issue detected, PF reset issued * How to setup and detail results+ I...
View ArticleClik here to view.
X540-T1 - Device stopped (code 43)
Hi there, I have 2x the same setup of one X540-T1 network card in a Logic Supply MK100B-50 (ASRock IMB-181-D Motherboard) and in both computers, after a certain amount of usage, the X540-T1 card stops...
View ArticleX540-T2 Link is Down
I have X540-T2 adapter on ubuntu 14.04 server and netgear xs708e swich but at last one time in 24h I have link down messasge in console. ixgbe 0000:04:00.0: eth0: NIC Link is Down ixgbe 0000:04:00.0:...
View ArticleClik here to view.
I219-LM Change Tx/Rx buffer size in Windows 7
Hello, I am using the newest driver for the Intel I219-LM network adapter in Windows 7. I need to change the size of the receive andtransmit buffers to: Receive buffers : 512Transmit buffers: 128 I...
View ArticleClik here to view.
XL710 NVM v5.0.5 - TX driver issue detected, PF reset issued &...
I've been having issues with TX driver issue detected, PF reset issued and fail to add cloud filter for quite some time across 12 VMware ESXi v6.0 hosts. About once a week the result is a purple screen...
View ArticleClik here to view.
I219-V, no connection.
Hi, I'm french so I'm already sorry for all the mistakes I'm going to make So I built my pc (I7 7700K, GTX 1080, MSI Z70, WIN10), everything was going fine the first 3 days but last sunday I lost the...
View ArticleClik here to view.
bridge mode issue with i40e vf
Hi, I have a network topology as the following: PF1 and PF2, PF3 and PF4 is connected directly.VM1, VM2, VM3 are all passthrough a VF from these PFs.The two vfs in VM2 are all added into a linux...
View ArticleModule eeprom with i40e and XL710-QDA1
Hi Intel, I would like to read-out the module eeprom of QSFP transceiver connected to a XL710-QDA1 NIC. The naive approach failed: ethtool -m eth0. It reports: "Cannot get module EEPROM information:...
View ArticleX540-T2 VF cannot receive packet with OVS
I have configured host with two PF and 16 x2 VF in debian system. It worked well if I use the PF/VF as standalone NIC, but not functional with OVS bridge. The testing scenario as below: eth0 (PF):...
View ArticleRSS Support in IXGBEVF
I am using 3.3.2 ixgbevf in guest and 5.0.4 ixgbe on host. I noticed that even though there are two RX queues for each VF, but pretty much all the packets go to the first RX queue. The RSS related...
View ArticleWhere can i get the intel IES api user guide?
or this guide is private? not for every developer to use?
View Article