Determine transceiver module serial number from i40e (XL710) pf driver ?
How can the transceiver module's serial number be extracted in the pf driver ? Also is it possible to extract the transceiver serial number in the VF driver ?
View Articlei40e XL710 QDA2 as iSCSI initiator results in "RX driver issue detected, PF...
Hi! There is a dual E5-2690v3 box based on Supermicro SYS-2028GR-TR/X10DRG-H, BIOS 1.0c, running Ubuntu 16.04.1, w. all current updates.It has a XL710-QDA2 card, fw 5.0.40043 api 1.5 nvm 5.04...
View ArticleWhat is VC_CRT_x64 version 1.02.0000?
What installs it and is it relevant with Intel Network Connections 21.1.30.0? We are very security conscience and want to remove this software if it has no purpose. I am wondering if this was...
View ArticleX540-AT2 speed problem
Hi!I a have Intel s2600wt motherboard this two X540-AT2 ehernet adapters. Link speed in auto negatiation is only 100mbps, then i set 1000mbps on switch or in ethernet adapter properties - link lost. My...
View ArticleClik here to view.
Flow Director configuration not working
Hi:I am using the i40e_4.4.0 driver for XL710 Network Card. Currently, I am trying to loopback the connections. For this purpose, I had to set the two ports on promiscuous mode. Thus, using my...
View ArticleIES api install problem & HNI Driver
Hi all, I am setting up the test environment for FM10000. I downloaded IES( Intel Ethernet Switch Software ) api and tried to install it in Unbuntu 16.04 LTS. I followed the guideline in some Documents...
View ArticleIssue with setting smp_affinity on ixgbe cards
Hi,I am using a Dell PowerEdge R730 with Dual Xeon, each 22 cores, with 6 ixgbe compatible cards, on which I am running Linux with ixgbe driver version 4.4.0-k, using kernel versions both 4.7.10 and...
View ArticleDifference in DPDK and Native IXGBE driver support for 82599 NIC
Hello All, We have been trying to make Unicast promiscuous mode work with RHEL7.3 with latest native ixgbe driver (ixgbe-5.1.3), but it seems that unicast promiscuous mode is not enabled for 82599...
View ArticleClik here to view.
X710 Flow director issues on Linux
Hello all, I am not able to setup Flow Director to filter flow type ipv4. It did not seems to have this issue when flow type is specified as tcp.Its on Linux(4.9.27), freshly download driver off...
View ArticleEthernet Controller X710 for 10GbE SFP+
Hello,I have a problem connecting a DELL server with the INTEL X710 + SFP Intel FTLX8571D3BCVIT1 with OS Redhat 7.3, and a Junipers MX960, when we cut the port or disconnect the cable, our server says...
View ArticleClik here to view.
Does the I340-F4 support 100base-FX SFP modules
We am looking for a quad port PCI express card with 100base-FX interfaces, under Windows 7 32-bit. Does the I340-F4 support 100base-FX SFP modules?I am not sure if SFP modules are plug-and-play for...
View ArticleClik here to view.
What is VC_CRT_x64 version 1.02.0000?
What installs it and is it relevant with Intel Network Connections 21.1.30.0? We are very security conscience and want to remove this software if it has no purpose. I am wondering if this was...
View ArticleClik here to view.
SR-IOV with IXGBE - Vlan packets getting spoofed
Hi All, I am using RHEL7.3 with Intel-82599ES nic cards to launch VMs with SRIOV enabled nic cards. I am using configuring only one VF per PF. I am configuring this VF with vlan, trust mode on and...
View ArticleClik here to view.
Flow Director configuration not working
Hi:I am using the i40e_4.4.0 driver for XL710 Network Card. Currently, I am trying to loopback the connections. For this purpose, I had to set the two ports on promiscuous mode. Thus, using my...
View ArticleClik here to view.
Intel(R) Ethernet Connection (2) I219-V whats with the (2)?
I have an Asus Z170 Pro Gaming motherboard with the I219-V LAN port but even on a fresh Windows 7 or Windows 10 installation, the port always shows up as having the (2) prefix even though its the only...
View Articleintel pro/1000 pt bricked?
I was trying to install an intel pro/1000 pt dual-port card into a Ubuntu linux server computer and ran into the "NVM Checksum is Invalid" message. I tried to run the bootutil utility on the card, but...
View ArticleClik here to view.
XL710-QDA2 with Intel QSFP-40G-SR4 SFP
Hi All, We have "Intel Ethernet Converged Network Adapter XL710-QDA2". 1) Configured in 2x40 mode 2) The two ports on the board are connected back to back with below SFP:...
View ArticleClik here to view.
How do I enable rx-fcs and rx-all for Intel X710 10-Gigabit SFI/SFP+ Network...
I have tried "ethtool -K <devicename> rx-fcs on" but it does not work and shows this feature as "fixed." Is there a way to enable this feature using a different method? Note: "Failed to get...
View ArticleIntel PRO 1000 CT Desktop adapter - WOL in Windows 10 does not work
Dear all, the Intel PRO 1000 CT Desktop Adapter (EXPI9301CT ) is supporting WOL.But it does not work when you try to use it in a Windows 10 machine.I think the reason is the Driver. Because Intel does...
View ArticleIntel 82579V drops connection every hour on windows 10
Hi, I have an Acer Aspire X3960 small desktop with Intel 82579V. Ever since upgrading to Windows 10 from Windows 7 I have had problems with dropped connections. I have tried various drivers from Intel...
View Article