I210-IS speed LED and active LED will light up when disable the corresponding...
Hi, we have an issue about the I210-IS, when we set the PCIE root port to "disable", the speed LED and active LED will light up.when set it to "enable", and there was no link, the LEDs will go...
View ArticleInstall Ethernet I219-V Driver on CentOS7
I download the driver on 下载 用于 FreeBSD 的英特尔®网络适配器千兆位基本驱动程序 * , which is suitable for the device Intel Corporation Ethernet Connection I219-V.But when I go into the src folder and type "make" command,...
View ArticleFlow director rules not applied
Hi, I'm trying to get my XL710 NIC to send packets to different queues but so far without any luck. I'm running Ubuntu with kernel version 4.16.1. I downloaded version 2.4.6 of the i40e driver from the...
View ArticleFIT/MTBF/MTTF/failure rate of network controller card I340-T4 E1G44HTBLK
Dear Sir or Madam, we have to carry out a new MTBF calculation of an entire system for our customer.In this regard, I wanted to ask if you could provide the corresponding data for the network...
View ArticleXL710 qda2 - link down - no matter what?
Hi I'm new with that NICI'm trying to create a loop from one interface to the other - XL710 - qda2The link are downI actually connected a cable between them - Do I need a special cable to that? I've...
View ArticleMotherboard with Intel chipset and realtek OOB RealManage
Hi ! We have some workstations that have the following problem : They have the OOB ip address active and different from windows although the configuration is DHCP for both. Windows is not cloning the...
View ArticleUpdating i210 firmware with EEUPDATE has intermittent bad results
Our proprietary motherboards have two i210-AT NIC's. Our vendor currently supplies the boards with both NIC NVRAM's loaded with firmware version 3.16. We are trying to update the NIC's to firmware...
View ArticleVLANs disabled in Windows 10 Build 17133.1 Version 1803
Hi. So my problems is that with latest version of windows VLANS dont activate they stay disabled state, reinstalling drivers does nothing and they are newest version from intels website. Ou snap...
View Articleeeupdate64e fails: Unable to initialize adapter 2 code c86a2002 [linux]
We have been using the 32-bit version of eeupdate (eeupdate32 from the Quartzville tools package) for programming the MAC addresses in our Intel 82574L NICs for a while now. After updating the OS to 64...
View ArticleIntel Active Management Technology (Intel AMT)
Hi We have computers that have Intel AMT enabled. The OOB IP is configured for dhcp but they are not releasing the ip address althought the lease is 24 hrs. Because of that we are having ip address...
View ArticleI218-V ULP tool
Got the code 10 issue with my I218-V adapter, can someone send me the ULP utility so I can try it?
View ArticleI350-T2 + I219V teaming in Win 10 build 14393.2214
I also have teaming problem with I350-T2 + I219VI use win10 64-bit with build 14393.2214 (released at 17th, April) and the latest driver (Download Intel® Network Adapter Driver for Windows® 10 )I can...
View ArticleIntel XL710-QDA2 Compatibility with Dell Networking Cable QSFP+ to QSFP+...
Hi all, I have an Intel XL710-QDA2 dual port 40Gb adapter.Intel® Ethernet Converged Network Adapter XL710-QDA2 Product Specifications I am trying to connect the adapter to my network but do not have...
View ArticleI210 Teaming after Windows 10 April 2018 Update
I had a pair of I210 NICs (a dual-NIC motherboard) teamed via Static Link Aggregation and all was working fine until today when Windows 10 x64 decided to apply the April 2018 cumulative update. The...
View Articlex550-t2 installation with vmware esxi 6.5u2
Hello, I just received my new dell server and the Intel x550-t2 card does not show up in the vmware console. Do I need to install drivers for it to work properly? It is displayed as compatible with...
View ArticleVLANs disabled in Windows 10 Build 17133.1 Version 1803
This issue was covered here but was NOT resolved and mark answered by accident.VLANs disabled in Windows 10 Build 17133.1 Version 1803 My steps were as followsRan fine with Windows 10 Ver. 1709 for...
View Articlex710 4x10G card not working Amphenol cable
Hi Sharon and Ninwardspiral, We are having similar problems with the exact same NIC, and by coincidence with the same breakout cable (although we tested many). Driver and firmware are updated to the...
View ArticleI219-V can't cast to TV or any other device
I have a Windows 10 system on Z370 chipset with INTEL® ETHERNET CONNECTION I219-V. Latest drivers is installed. When I'm trying to use "cast to" option, it falls with error "can't connect to device"....
View ArticleI211/I217-V Windows 10 LACP teaming fails
Hello, after the update to Windows 10 (x64, Build 10240) the creation of a teaming group (static or IEEE802.3ad) with a I211+I217-V NIC fails. Drivers have been upgraded to the latest version available...
View ArticleProgramming Flash for 82574
Hi, we have been redirected here from this thread in the embedded community: ARM tools for 82574 |Embedded Community To summarize the important parts of our previous discussion, we have an Intel...
View Article