SR-IOV on 82576 on, VM on VF can not talk to VM on Bridged network
I have set up SR-IOV on a Dell C6145 that has an Intell 82576. Configuration is VM1 is assigned a direct VF, on network 10.10.6.0/22VM2 on same host is not assigned a VF, and has a bridged network br0...
View ArticleBonding in active-backup mode with VF
Hi all,Can someone confirm that if one wants to configure active-backup bonding with 2 VFs, the fail_over_mac option should be set to 1?According to my experiments and web searches, it looks like this...
View ArticleIntel 82579V Issue
<><> Apologies if this has been posted in the wrong place <><> Ok I'll keep this brief. Problem:- LAN regulary disconnects and reconnets 30 seconds later. Symptons:- Loose...
View ArticleEmulex performance comparison with x520?
Emulex claims that x520 can achieve only 5Gbps for a 1500 MTU per port per direction. http://www.emulex.com/artifacts/3e5fde40-3af2-4a9e-ba0a-8f5946667694/elx_all_10gbe_oce11102_intel_x520.pdf Is this...
View Articleoverlapping packets
Hello,I bought Intel i210-t1 network card (kernel 3.3.4-5.fc17.i686.PAE Fedora 17) and compiled igb driver with PTP (Precision Time Protocol) option and with tcpdump command and -j adapter option...
View ArticleCache memory of PCIe Intel i350?
Hi,How much cache memory has the PCIe Intel i350? Thanks.
View ArticleSetting the SpeedDuplex from the command line
I am trying to set the SpeedDuplex setting on an "Intel(R) Ethernet Server Adapter I350-T4" card from the command line. I have installed the latest "Network Adapter Driver" and have followed the steps...
View Articleconfigure pro/1000 PT quad port for use on Hyper-v 2008 rc2
Hello How do you configure the speed and duplex on a Windows 2008 RC2 core installation. The system recognizes the card but the duplex is wrong. Thanks Gerry
View Articlehardware timestamping
Hello,Which Intel ethernet network card I can use to get timestamped (on the card) all outgoing packets on the link?
View Article82583V and Windows server 2008 R2
Hi. Where can I find windows server 2008 R2 driver for 82583V (DEV_150C).i have a PCIE-Q670 card...
View ArticleI217-V No connection with 100 full duplex setting
We've just started deploying some new PCs that have the intel i217v ethernet controller and there has been an intermittent problem where if the interface is set to 100mb full duplex it will drop the...
View Article"This Version Of Intel Proset is not supported for upgrades. You must install...
log;Hi, I am trying to installing the latest version of Intel Proset onto a 2008 Server to enable NIC load balancing, but it fails everytime with the message "This Version Of Intel Proset is not...
View ArticleIntel Onboard LAN Freeze System for seconds every serveral minutes.
Hi, I am using an intel onboard ethernet I217-V with most updated driver e1d63x64.sys 12.8.33.0 (5/30/2013). I am using Windows 8 64-bit and recently I found the system freeze for seconds every...
View Article82566DC LAN port on motherboard will not utilise DHCP
I have a Dell Dimension 9200 with an 82566DC (Gigabit) LAN port on motherboard. O/S is now Win7 64-bit SP1 fully patched. Previously was on Vista.The only way I can get it to connect reliably to my...
View Article82579V Win8 reporting "No Internet Connection", but connected
I'm pulling my hair out here. I've reverted drivers back to the Microsoft drivers, re-installed various times and think I have this issue fixed only for it to come back a few days later. 82579V on...
View Article82574L NIC on DZ77GA-70K failing repeatedly
New Windows 8 install on DZ77GA-70K board. About every 24-48 hours the 82574L integrated NIC fails hard--all communication through it stops and Windows will not shut down--the NIC seems to be hanging...
View ArticleIntel Ethernet Connection I217-LM (WinPE drivers)
Hi everyone, We purchased a few DELL Optiplex 9020s that came with an Intel Ethernet Connection I217-LM ethernet controller, and I've been unable to find the correct WinPE x64 drivers for this...
View Articleintel 1000MT dual port can not run 802.1Q
Hello, My computer is WIN7x64 , I has two intel_1000MT_dual_port().I want connect to cisco_router for trunk/tag is faided.I also made reference to the following : Network Connectivity — My...
View ArticleIntel Server NIC I350 LACP IEEE802.3ad teaming issue
Hello I face an issue which i cannot resolve for almost month even with the help of intel support. I have:Intel Server System R1208GL4DS with buildin I350 4 ports inet adapterOS: Windows Server 2008...
View ArticleSR-IOV dropping packets when *other* VFs are configured
Hi, I've been doing some testing using an HP Ethernet 1Gb 2p 361T Adapter in a DL380p Gen8. The software used is CentOS 6.4 and igb 4.3.0 and igbvf 2.3.2 Intel drivers. I've noticed that when a VF...
View Article