XL710 priority queues
I have an XL710 VSI that is running in a VF and uses RSS queuing across multiple queues on input. I want to create a separate priority queue that will receive only certain frame types eg LACP. Is the...
View ArticleDetermine SFP module serial number from ixgbe driver?
Hi all, I've got some Intel 82599-based 10 Gbps NICs (using the ixgbe driver). I've plugged some direct-attach cables into these cards. Those cables have SFP+ ends, with a cable part number and...
View ArticleClik here to view.
Problems of IPv6+UDP/TCP, IPv4 and IPv6 RSS on XL710 NIC
The Fodora 20 system was installed with quad-port XL710 NIC. By default, the NIC driver creates 4 queues per port and both IPv4+UDP/TCP(udp4/tcp4) and IPv6+UDP/TCP(udp6/tcp6) for RSS are enabled. It...
View ArticleIntel I217/I218 issues with wake on lan
Having issues with the Intel I217 LM and I218 LM using WOL. It wakes up just fine after going to sleep for a few minutes or right after shutdown but if I leave the unit overnight and attempt a wake up...
View ArticleIntel I217/I218 Wake On Lan Not Working
On these two network adapters the wake on lan IS working if the unit goes to sleep/hibernate/off and you wake up within a few minutes. If you leave it to sleep/hibernate/off and try to wake up after...
View Article82566 MM gigabit link down
Hi folks, I have this adapter on a notebook Fujitsu Lifebook E8410. The adapter is gigabit capable.The OS is Windows7 x64 home edition. Problem: When I set the linkspeed to 100Mb full duplex the...
View ArticleVLAN tag inside NVGRE tunnel getting stripped by XL710 (i40e)
We're seeing something interesting: we're sending a packet from a third-party NIC to the XL710 and it seems the XL710 is stripping the VLAN tag inside the tunnel.The ethtool offload flags on the XL710...
View ArticleClik here to view.
Intel X540-T1 10GigE NIC works, but extremely slow, high latency on Ubuntu...
I have a new Intel X540-T1 network adapter. I installed the latest ixgbe-4.1.5 driver from Intel. The card is able to get an IP address from DHCP. However, viewing websites and installing packages with...
View Articlegamingbundle.intel.com
invalid code on https://gamingbundle.intel.com/offer/#/homeSomeone can help me ?
View Articleintel 82580 forced link up and Tx
Hi, I'm trying to do i82580 forced link up. (1G fiber) My current configuration is that RX port 0 is connected to IXIA packet generator tx port and TX port 0 remained not connected to anything. I wish...
View Articleintel nic drivers 19.3 huge 6000+ dpc latency spike once a few secs
hi, i would like to report that the new intel nic drivers version 19.3 that just released recently has huge 6000+ dpc latency spike once in a few secs. my specs Intel(R) 82579LM Gigabit Network...
View ArticleIntel i218-v promiscuous mode failure
Hello, some sort of bug report. To whom it may be of interest : No ping between host and guests ( but from and to any other node ).Works when switching to a rtl8169 chip. Details : Windows 7 pro 64bit...
View ArticleClik here to view.
Clik here to view.
Intel® 82576NS Gigabit Ethernet Controller - Unable to Install Driver
Hi there,I have win server 2008 R2 - 64bit installed.with Intel® 82576NS Gigabit Ethernet Controlleri tried to install the network driver...
View ArticleIntel Corporation 82599ES 10-Gigabit SFI/SFP+ Unix driver unwanted behavior...
Hello, We actually are making a POC to migrate our infra to 10Gb/s. We use RHEL6.7 on HP DL360p servers. The 10Gb/s cards are Intel Corporation 82599ES 10-Gigabit SFI/SFP+. The ixgbe drivers we use...
View ArticleClik here to view.
Intel 82580 1000 Base-X (fiber) TX clock source
Hi, Does intel 82580 1000Base-X(fiber) transmit clock use local reference clock or rx recovered clock ? Thanks in advance.
View ArticleXL710 VLAN tag stripping in a VF.
I have an XL710 VSI that is running in a VF. I have added a vlan filter for a tag of '2' to my vsi using the I40E_VIRTCHNL_OP_ADD_VLAN message. The vsi is the default one created by the PF driver when...
View ArticleIntel Dual Band Wireless-AC 7265 issue
Greeting All, I am using Lenovo X250 Windows 7 Pro (32bits) with Intel Dual Band Wireless-AC 7265 wireless adapter. I can mange to connect other wireless SSID without any problem except at home. After...
View ArticleI211/I217-V Windows 10 LACP teaming fails
Hello, after the update to Windows 10 (x64, Build 10240) the creation of a teaming group (static or IEEE802.3ad) with a I211+I217-V NIC fails. Drivers have been upgraded to the latest version available...
View ArticleClik here to view.
Wireshark/Tshark on Host SR-IOV Interface
Greetings I am working on testing a DPDK based VM and need to see if packets are really leaving the host interface. I am using an HP DL-380 server with Intel based 10G nics. I have enabled SR-IOV and...
View Article