Connecting an Intel Ethernet XL710-QDA2 to an Intel® Ethernet Converged...
Hi I need to connect my server having a XL710 CNA QDA2 to another server with a X520-SR2 Network adapter(E10G42BFSR ). I was curious whether I can go with the Intel Ethernet QSFP+ breakout cable...
View ArticleIntel Ethernet I219-V disconnecting on speedtest and restarting randomly
My motherboard is Asrock B150A-X1 and it uses this ethernet controller Just like the title,when i go over to speedtest.net and click begin test,speed will instantly go to 90ish mbps and then the...
View ArticleClik here to view.
PTP/IEEE 1588 one-step capable NICs
Hi everyone, I've been looking for some time now, even studying the driver code, but I have not been able to figure it out yet. I know that there are IEEE1588 capable NICs that Intel offers. But it...
View ArticleDPC Latency problems with Intel 82579LM based Network Controller on Windows 8
Hi, After weeks of troubleshooting DPC latency problems on my Lenovo Thinkpad T420 laptop which were causing audio dropouts and mouse freezes every few mins I have finally tracked down the source of...
View ArticleClik here to view.
dh61sa No intel R Ethernet adapters present on this computer
Hello,I'm on window server 2012 R2 and when I try to install the ethernet drivers it says "No Intel(R) adapters present on this computer"I have Intel DH61SA board.I can see it inside other devices in...
View ArticleET Dual Port Server Adapter And 2012R2
Hi All,Upgrading my home lab.looking to see if Intel E1G42ET NIC is compatible with Windows Server 2012R2.Planning to learn the virtualization portion of theIntel NIC. Not finding that particular...
View ArticleNo network connection with l218-V with Link Speed over 100mbit/half duplex.
Motherboard: Maximus VII Ranger Bios: 3003 Driver version: 12.12.218.0 PROset version: 20.1.1022 Windows 10 64-bit (currently, problem started in windows 7) Yesterday, in preparation of upgrading to...
View ArticleClik here to view.
Intel Ethernet Connection I219-LM not working with Windows 10 deployment via...
Hello, we have a Dell Latitude E7270 that has the Intel L219-LM Ethernet adapter. I am using a WDS server to deploy a Windows 10 Image onto the computer, but it does not get an IP address. I am able to...
View ArticleIntel Ethernet Connection I219-LM not working with Windows 7 deployment via...
We are running into a similar issue, trying to PXE boot and pick up a image deployment from our SCCM configuration manager. Intel(R) Ethernet Connection (2) I219-LMversion 12.13.17.6Lenovo Thinkcentre...
View ArticleClik here to view.
Connecting an Intel Ethernet XL710-QDA2 to an Intel® Ethernet Converged...
Hi I need to connect my server having a XL710 CNA QDA2 to another server with a X520-SR2 Network adapter(E10G42BFSR ). I was curious whether I can go with the Intel Ethernet QSFP+ breakout cable...
View Articlei350 igbvf driver
Hi, Does the driver support multiple DMA queues? For example, I would liketo spread receive and transmit traffic across multiple threads within a VM orpin a thread to a DMA Rx/Tx pair. Thanks, Michael
View ArticleLink state flap with traffic does not recover for SR-IOV VFs
Using DPDK 2.3 and ixgbe driver 4.13.15. When there is no traffic on the link and it is flapped, the VFs recover the link state properly. When there is too much traffic though, the link state can't...
View ArticleI217 support removed from the UEFI Ethernet Driver
I tried using the 20.7 UEFI Ethernet Driver E7006X3.EFI, but I see that I217 support has been removed. Why? I need I217-LM support in this driver. Going back I see the last time it was in the Driver...
View ArticleClik here to view.
x710-DA2 iSCSI Connections Keep Disconnecting
Our setup:Server 2012 R2 Hyper-V Cluster3 HP DL380p Hosts HP MSA 2040 SAN2 Cisco Nexus 5000 series Switches dedicated to iSCSI storage networkEach Host has an Intel x710-DA2 10Gb NIC, latest firmware...
View ArticleX710 dropping LLDP frames ?
Hello, We have servers with 2 XL710 quad cards each. In first, we got this firmware version:firmware-version: f4.22 a1.1 n04.26 e8000152dLLDP was working fine, no problem, trames are correctly...
View ArticleNeed to downgrade "nvm" on Intel x710-DA2 10G ethernet card
As part of a problem investigation, I update the "nvm" / firmware on a couple of Intel X710-DA2 10G ethernet cards using the NVM Update package (Download NVM Update Utility for Intel® Ethernet...
View ArticleI210 Flash map issue
Hi Sir, Some I210 flash maps have three types offsets, Flash Word Offsets, Global MNG Offset & Offset. What meanings are for them?For example: SMBus 0 slave address Flash Word Offsets: 0x51,...
View ArticleNo display on windows 10 after RESTART
Hello, These are my computer specs: Dell Computer – Inspiron N5050 Intel Core I3-2350M CPU @ 2.30GHz Intel HD Graphics 3000 / Board 0x1028 (0x0504) MainBoard: 01HXXJ A03 Chipset : Sandy...
View Articleintel nic drivers 19.3 huge 6000+ dpc latency spike once a few secs
hi, i would like to report that the new intel nic drivers version 19.3 that just released recently has huge 6000+ dpc latency spike once in a few secs. my specs Intel(R) 82579LM Gigabit Network...
View ArticleX710-DA4 - SR-IOV not working correctly
Host OS: Ubuntu 16.04 LTSHypervisor: Xen 4.6.0Kernel version: 4.4.0-22-genericDriver version: i40e-1.5.18NVM version: 5.02Guest OS: Windows Server 2012 R2Guest Driver version: 20.7.1 I'm trying to...
View Article