Intel network driver interfering with audio
Hi, I'm having one of the strangest audio problems I've ever seen on my PC right now, which seems to be linked to my internet connection (of all things), which uses an intel network driver. First off...
View ArticleCan I connect the X4DACBL3 to the HP 5412zl module j9536a?
I have install a XL710-QDA2 on a supermicro server and have setup the NIC with 4x10 through the EFI utlity QCU. I would like to connect the server to my HP 5412zl switch, but so far no luck just "port...
View ArticleHi, is it possible to find a win2000 advanced server driver for a wired 10Gb...
I need to upgrade an old Win2000 Advanced Server to 10Gb Ethernet with Cat 6A wire.The motherboard is a Tyan bi-Opteron 2216 with PCI Express connectors.Has anyone a solution ?Thanks for the return...
View ArticleLooking for X540-T1 Windows 10 Driver
My distributor listed this 10Gb NIC as PC compatible. Windows 10 does not even acknowledge the card.
View ArticleCan X520-DA1 using 10Gbase-SR/LR transceiver?
I install X520-DA1 in two Windows 7 PCs, with 10Gbase-SR transceiver and an OM3 multi-mode fiber connected together.I use iperf to test the speed, no matter how I tuned it, it can only run about 1.3...
View Articlei219-V Stability Issues when Link Speed is negotiated above 10M-FDx
Greetings,A recently acquired motherboard has an on-board Intel i219-V NIC. Within a fresh Win7 Pro SP1 x64 install with latest Intel drivers (driver v12.15.23.1, PROSet v21.0.504.0), I am experiencing...
View ArticleIntel Ethernet Converged Network Adapter X550 max buffer settings
Hello, I would like to know if there is documentation which would state how to increase the buffer settings for this card on Windows 7 and Windows 10 workstations. We are looking to find the high and...
View ArticleVLAN creation on Windows 10 Enterprise TP
Hello, there. This morning I upgraded my fully functionnal Windows 8.1 Enterprise installation to Windows 10 Technical Preview. Before that, I downloaded the Intel Network Adapter Driver from this...
View ArticleSTAG support on XL710?
Does the Intel XL710 4x10GE card support the processing of VLAN frames that have are tagged with STAGs (TPID == 0x88a8) instead of CTAGs (TPID == 0x8100)? In my lab, I have tried a number of things...
View ArticleXL710-QDA2 directly connect two computers - no switch, is this possible?
I have two computers, each with a XL710-QDA2, currently running Windows Server 2016 Tech Preview 5.Is it possible to directly connect these two with the QSFP+ cable?This does not seem to be working for me
View ArticleIntel i211-AT linux driver
where could find intel i211-at ethernet linux driver ? (02:00.0 Class 0200: Device 8086:1532 (rev 03))igb-5.3.5.3.tar.gz does not include support intel i211-at devicei need porting it to intel braswell...
View ArticleEthernet Driver problems..
Been having some problems with my Ethernet Connection. http://prntscr.com/bywd09and when i try to check for updates it just tells me i'm already using the lates version, I've been using an Old WiFi...
View ArticleSend manageability commands through SMBus without BMC
Hello, I bought a two-port Intel I350 NIC (vendor says "Generic i350-t2 V2"), and I wish to enable its critical session feature (also known as veto bit, keep PHY link up, and manageability session)....
View ArticleWindows 10 I217-V TCP IPV6 Checksum fails on RX
ISP has IPV6 enabled and I noticed my desktop PC stopped getting Windows updates. After much digging and test, I found out that my NIC was dropping TCP packet on the receive from Windows Update. After...
View ArticleDocument request for Fisher Flat External Product Specification(EPS)
Customer looking for available of EPS for Fisher Flat adapter card model XL710-QDA2.
View ArticleI350 teaming on Windows 10 active/passive configuration
I know that teaming is not supported for WIndows 10 at the moment by Intel drivers but maybe someone will have some info about my problem. I am trying to set NIC (I350) teaming in active/passive...
View ArticleRandom BSOD in Windows Server 2008 R2 due to elr62x64.sys
Hi, While running our application in windows 2008 R2 server some random BSOD are happening. On analyzing the dump it points to a call from elr62x64.sys and then fails in tcpip.sys. Since tcpip.sys...
View Articlei350 - enable critical session
Hi, I recently bought an i350 ethernet controller. I would like to enable the "critical manageability session" of the card, but I can't find any documentation that explains how to do that. The only...
View ArticleI210 lost firmware
Hi, my Supermicro X10SRL-F has two onboard I210 NICs. Two days ago, after having it passed one through to a PFSense VM with KVM, they now show up under Linux as 07:00.0 Ethernet controller: Intel...
View Articleintel nic drivers 19.3 huge 6000+ dpc latency spike once a few secs
hi, i would like to report that the new intel nic drivers version 19.3 that just released recently has huge 6000+ dpc latency spike once in a few secs. my specs Intel(R) 82579LM Gigabit Network...
View Article