Clik here to view.
Intel ethernet connection I218-LM Code 10
Hi all,I am using Intel Ethernet connection I218 LM on laptop with Windows 10 - 1607, and i got code 10, device can not start. driver version 12.12.218.0. please help me to solve it. Thanks you
View ArticleIntel Ethernet Connection I219-V disconnect
Hi, my lan cable connection is disconnecting/reconnecting every few minutes. It's not internet problem since WiFi works fine. I've updated the drivers to latest, re-install from board cd, still the...
View ArticleClik here to view.
I211/I217-V Windows 10 LACP teaming fails
Hello, after the update to Windows 10 (x64, Build 10240) the creation of a teaming group (static or IEEE802.3ad) with a I211+I217-V NIC fails. Drivers have been upgraded to the latest version available...
View ArticleClik here to view.
I218-V driver CD-ROM
I have just tried to update my NIC driver for an I218-V adapter built into my motherboard. The driver downloads (allegedly version 21.0) & the install begins, but at a certain point it prompts me...
View ArticleLooking for X540-T1 Windows 10 Driver
My distributor listed this 10Gb NIC as PC compatible. Windows 10 does not even acknowledge the card.
View ArticleWindows 10 I217-V TCP IPV6 Checksum fails on RX
ISP has IPV6 enabled and I noticed my desktop PC stopped getting Windows updates. After much digging and test, I found out that my NIC was dropping TCP packet on the receive from Windows Update. After...
View ArticleIntel Ethernet I219-V has problems establishing connection.
Just built a new computer with a I219-V ethernet device and it has extremely difficulty establishing connection upon boot. upon booting the computer, the network jumps between unplugged and searching...
View ArticleProblem with assign SR-IOV Intel NIC to QEMU Virtual Machine.
Hello, I am using an Intel 82599 NIC and would like to use the SR-IOV function to assign the virtual functions to my virtual machine. I actually follow the on-line Intel document to add the...
View ArticleProblem with XL710-Q2 and QSFP Configuration Utility
I have a network adapter XL710-Q2 and I want to use QSFP+ to 4x10G breakout cable. I need to activate 4x10 mode in NIC, but I cant. When I run ./qcu64e utility, I get a error: # ./qcu64e /nic=1...
View ArticleX520-DA1 or X520-LR1 with Intel SFP+ extremely slow speed ...
I have two DELL PCs each installed Intel X520-DA1 with SFP+ (FTLX1471D3BCV-IT) and using single mode fiber to connect two PCs directly, on Windows 7 ultimate 64bit the adapter linked as 10Gbps, but...
View ArticleClik here to view.
Upgrading I350-T2 driver from v12 to v21 causes 2012R2 to bluescreen!
I'm currently running an I350-T2 NIC in a Windows 2012 R2 server with a Z68 chipset. I have two switches for the network, and each port on the I350-T2 is plugged into one of the two switches. The...
View Articlex552/x557 to HPE OfficeConnect 1950 24G 2SFP+ 2XGT Switch(JG960A)
Hi, I connected server 10GBase-T port to switch 10GBase-T port with Cat.7 STP cable(length 1m).Two interfaces are up at 1Gbps speed not at 10Gbps. = Motherboard: Supermicro X10SDV-4C-TLN4F - CPU: Intel...
View Articleplease help me
Connection Status : Failed This test relies on a response from a gateway, DNS, DHCP, or WINS server and no such response was received.Any such server for this connection...
View ArticleClik here to view.
intel nic drivers 19.3 huge 6000+ dpc latency spike once a few secs
hi, i would like to report that the new intel nic drivers version 19.3 that just released recently has huge 6000+ dpc latency spike once in a few secs. my specs Intel(R) 82579LM Gigabit Network...
View Articlex710 network link is disconnected
I have been experiencing NIC drops on multiple servers across our organization for over 6 months. I have had number cases open with Dell and Microsoft unsure if our 10gb switches were causing the...
View ArticleHow to program for NC-SI with Intel i210
Hello, in a possible future project I have to programm an application to send data via NC-SI on a Intel i210. To prepare I am looking for information on how to program software to communicate via...
View ArticleClik here to view.
i350 - enable critical session
Hi, I recently bought an i350 ethernet controller. I would like to enable the "critical manageability session" of the card, but I can't find any documentation that explains how to do that. The only...
View ArticleRemove Queue from RSS on 82599ES ixgbe 4.3.13
I used the script that comes with the ixgbe driver to pair the NIC queues with corresponding cores (set_irq_affinity). I have also enabled flow director (ethtool -K p1p1 ntuple on) and I added a rule...
View Article82579lm
Hello, My Intel 82579lm shows MAC 00:00:00:00:00:00 How I can fix it?Thank you.
View ArticleClik here to view.
Re: 82579lm
Hi Yurik777, Please feel free to update me the information requested on my post and if you still encounter the said issue?rgds,wb
View Article