Intel Ethernet Connection I219-V disconnect
Hi, my lan cable connection is disconnecting/reconnecting every few minutes. It's not internet problem since WiFi works fine. I've updated the drivers to latest, re-install from board cd, still the...
View ArticleI211/I217-V Windows 10 LACP teaming fails
Hello, after the update to Windows 10 (x64, Build 10240) the creation of a teaming group (static or IEEE802.3ad) with a I211+I217-V NIC fails. Drivers have been upgraded to the latest version available...
View Articlex552/x557 to HPE OfficeConnect 1950 24G 2SFP+ 2XGT Switch(JG960A)
Hi, I connected server 10GBase-T port to switch 10GBase-T port with Cat.7 STP cable(length 1m).Two interfaces are up at 1Gbps speed not at 10Gbps. = Motherboard: Supermicro X10SDV-4C-TLN4F - CPU: Intel...
View ArticleClik here to view.
How to enable JTAG port on i210?
Hi, We are struggling to get the JTAG chain working on WGI210. Do we need to set some pins at a particular level before we can activate this? Is there a defined startup sequence needed for this?...
View ArticleIntel I218-V Error Code 10
I have the same issue that everyone else seems to have. My I218-V network adapter doesn't work upon restarting my PC.I have to disable and re-enable the adapter in the BIOS to get it to work for one...
View ArticleDual i210 implimentation
I have a new base board design which has x2 i210 devices. The base board is also a carrier for a qseven computer-on-module, which has an Intel Atom E3825 CPU, also supporting an Intel i210.This is...
View ArticleClik here to view.
Problem with XL710-Q2 and QSFP Configuration Utility
I have a network adapter XL710-Q2 and I want to use QSFP+ to 4x10G breakout cable. I need to activate 4x10 mode in NIC, but I cant. When I run ./qcu64e utility, I get a error: # ./qcu64e /nic=1...
View Articlesmart tv (capable of wireless display) with Intel My Wi-Fi Dashboard ???
i try to connect a smart tv capable of wireless display with Intel My Wi-Fi Dashboard ... https://postimg.org/image/y4khjvf1p/ ... https://postimg.org/image/mfaivwenv/ ...when i connect .... tv...
View ArticleRe: x710 network link is disconnected
We are having a very similar issue with our Intel X710 based NIC's, that seemed to start happening out of the blue. We are running a Hyper-V cluster based on Dell R730 servers, and recently as we have...
View ArticleXL710-QDA2 directly connect two computers - no switch, is this possible?
I have two computers, each with a XL710-QDA2, currently running Windows Server 2016 Tech Preview 5.Is it possible to directly connect these two with the QSFP+ cable?This does not seem to be working for me
View Articleplease help me
Connection Status : Failed This test relies on a response from a gateway, DNS, DHCP, or WINS server and no such response was received.Any such server for this connection...
View ArticleX520-DA1 or X520-LR1 with Intel SFP+ extremely slow speed ...
I have two DELL PCs each installed Intel X520-DA1 with SFP+ (FTLX1471D3BCV-IT) and using single mode fiber to connect two PCs directly, on Windows 7 ultimate 64bit the adapter linked as 10Gbps, but...
View ArticleWindows 10 I217-V TCP IPV6 Checksum fails on RX
ISP has IPV6 enabled and I noticed my desktop PC stopped getting Windows updates. After much digging and test, I found out that my NIC was dropping TCP packet on the receive from Windows Update. After...
View ArticleClik here to view.
PROwix64.exe
Hi, I downloaded Intel Network Adapter Driver for Windows 7, PROwinx64.exe. and I got a high ping like 600ms after that. Can someone help me?
View ArticleClik here to view.
Why LnkSta and LnkCtl show different with X710?
Hi, My lspci -vvv output for the X710DA4 Ethernet Adapter shows LnkSta to be 8GT/s but LnkCtl is 2.5GT/s. Motherboard used is the S2600CW with dual E5-2697Av4 CPU. Thanks....
View ArticleProblem with ethernet adapters
Hi i have the modo intel z77 dz77ga-70k i have issues with both ethernet adapters disable it at random i try reinstal drivers i try the latest i try the ms drivers nothing i have win 10 pro x64
View ArticleSTAG support on XL710?
Does the Intel XL710 4x10GE card support the processing of VLAN frames that have are tagged with STAGs (TPID == 0x88a8) instead of CTAGs (TPID == 0x8100)? In my lab, I have tried a number of things...
View ArticleDual i210 implimentation
I have a new base board design which has x2 i210 devices. The base board is also a carrier for a qseven computer-on-module, which has an Intel Atom E3825 CPU, also supporting an Intel i210.This is...
View ArticleHow to enable JTAG port on i210?
Hi, We are struggling to get the JTAG chain working on WGI210. Do we need to set some pins at a particular level before we can activate this? Is there a defined startup sequence needed for this?...
View ArticleClik here to view.
Fisher Flat External Product Specification(EPS) Release
Anyone know on Fisher Flat EPS release date?Until now still release yet.XL710-QDA2 Regards,Patrick
View Article