Questions "Ethernet Connection (2) I219-V" and TDR (Time Domain...
Hello, I use the I219-V network adapter and wanted to know why the "test cable connections and frequency response" test does not work.The cable is a goobay patch cable CAT6 S / FTP 30 meters, double...
View ArticleProblem updating drivers for 82574L NIC
I an having difficulty in upgrading my NIC drivers from version 17.3.0 to 22.7.1. The workstation I am using is running Windows 10.Here is what I am trying to install: When I run the install program,...
View ArticleInput/Output Error When Connecting To The Network Via On-Board Port (X540-AT2)
Hi Team, We are trying to read data from the DB (Using a Python code) via network but the operation crashes with Input/Output error. The server is connected to the network using the onboard...
View ArticleIntel X710 with i40en-1.7.11 driver on VMware 6.7
Hi, I'm conducting network performance testing on VMware 6.7 using an Intel X710 quad port 10G NIC and seeing some unusual behavior. It started while testing our application, but also will happen when...
View ArticleWhy firmware upgrade (to 6.01) lead to link down at X710-Da4
Hi. I have X710-DA4 with Intel SFP+ moduls, which connected to optical splitter by single fiber (only receive mode). The link, which splitted, is 1000Base-LX. At firmare versions 5.05 and 4.53...
View ArticleWired Ethernet 82579V fails on cold boot in Windows 10 since Windows 10 update
Hi, I'm using a Gigabyte G1.Sniper M3 motherboard Z77 motherboard, which uses an Intel 82579V Ethernet chip. Since a few weeks (months?), obviously after a Windows 10 update of some sort, every time I...
View ArticleLinux KVM SRIOV: Spoofed packets, dropped frames
The primary issue is after several hours to upwards of a couple weeks a single VF will get into a bad state for a guest and we will see the following errors on the parent and child. Versions:Centos =...
View ArticleError in ixl VF driver during link state change.
I'm running a FreeBSD (pfSense) VM using SR-IOV on a KVM linux host. The linux host has it's dual port NIC bonded (balance-xor, layer3+4) and FreeBSD VF are bonded as well (LAGG, mode balanced).Pulling...
View ArticleX552 PHY EEPROM NVM Image
Hi, I am trying to update the PHY EEPROM on the X552 on my system, but cannot find the image binary file required alongside the for the MAC EEPROM. Below are the 2 NICs I am trying to configureBelow...
View ArticleIntel X550-T2 on vmware ESXi 6.5U2
Hi, I have installed an Intel X550-T2 card into a newly built esxi 6.5u2 server with the latest drivers, the host can detect the hardware but it doesn't show up in the vmware console. All the hardware...
View Article