Hi All,

I am connecting my Intel Galileo with the LAN cable and get the IP address using the DHCP server, but I am not able to get a valid IP address.

The IP address I am getting is 255.255.255.255

I am using the Example INO file DHCP Address Print to get the IP.

Any help on this is greatly appreciated.

-Ganesh

I have two servers running OpenSUSE both with  Intel dual port 82599EB 10-Gigabit SFI/SFP+ using the ixgbe drivers. And I'm not getting the bandwidth I expect with iperf. Both ports are connected directly to the the other two ports of the second server.

On one machine I run

iperf -s

On the other machine I run these two commands in separate terminals.

iperf -c 192.168.1.10 -t 20 -B 192.168.1.20

iperf -c 192.168.1.11 -t 20 -B 192.168.1.21

And I get

[  4]  0.0-20.0 sec  7.63 GBytes  3.28 Gbits/sec

[  5]  0.0-20.0 sec  14.7 GBytes  6.30 Gbits/sec

If I run only one port, I get

[  6]  0.0-20.0 sec  22.8 GBytes  9.80 Gbits/sec

Shouldn't I be able to expect roughly 10Gbe on each port simultaneously? Do I have the wrong hardware for that requirement? Or an invalid test?

What is the tx_restart_queue?

What causes tx_restart_queue to increment?

Is it normal to see packet drops when tx_restart_queue increments?

Hello,

I would like to report that the latest intel driver for 82579v (18.7.28.0) doesn't work with asus motherboard p8z77-I delux. In fact, all previous driver versions from 16.x to the latest never worked for WOL in Windows 8 x64.

A work around that I had found when I was using Windows 8 was to use the WHQL drivers from Asus which worked flawlessly, however ever since that I've upgraded to Windows 8.1 the Asus drivers are no longer compatible and WOL stopped working.

While I will advise Asus of this problem, the intel WOL functionality in definitely broken in 82579v on Windows 8.1 using the p8z88-I motherboard.

One thing I noticed while troubleshooting the problem is that if I shutdown my PC using a "service running account" from my ipad app, I am able to wake up my computer from the lan.

If I manually shut down the PC through my regular account, the wake up on lan doesn't work....

Any help is appreciated. Thanks.

Hi,

After weeks of troubleshooting DPC latency problems on my Lenovo Thinkpad T420 laptop which were causing audio dropouts and mouse freezes every few mins I have finally tracked down the source of the issue. It appears that the Intel 82579LM based Network Controller driver may not be correctly optimised for Windows 8. I'm running Windows 8 Pro 64-bit and am using the latest Intel driver for the controller (12.6.45.0). In troubleshooting the issue I tried everything I could think of such as:

Update BIOS and all drivers to latest versions

Disable CPU and PCI Power Management in BIOS

Disabled onboard Sound (I use a separate professional audio sound card), Wifi, Bluetooth

Change power management settings to High Performance and Disabled USB selective suspend

Turn on all offloading settings on Ethernet NIC

Ran bcdedit /set disabledynamictick yes

Disabling Network Location Awareness in Windows

Nothing made any noticable difference at all. I had also been noticing that my network performance had been pretty poor intermittently on this machine for a while, occasionally experiencing dropouts and low download speeds (yes I know that can be caused by many other factors but please hear me out). Every few mins on the PC I would experience a DPC latency spike of around 95000us to 100000us which would occur right when the audio dropouts, mouse freezes, and probably network pauses would occur. I use the PC for audio production amongst other things so this causes me big issues.

I was totally baffled by the problem until I ran an xperf trace in the Windows Performance Toolkit and saw that the spike was being generated from ndis.sys and tcpip.sys. That got me thinking down the lines of a network related problem so I disabled the onboard Intel(R) 82579LM based Network Controller in Device Manager in Windows 8 and what do you know the problem disappeared competely!!  No more DPC latency spikes ever (tested for hours and many times). I can do pretty much whatever I like on the PC and the problem does not reoccur. Not one single audio dropout in my Audio DAW either. The onboard Wifi is still running (Intel Centrino Advanced-N 6205 - v15.8.0.5) providing me with network access and download speeds through the wireless nic are both much faster and more stable surprisingly (should be the other way around if anything). As soon as I re-enable the 82579LM NIC the problem is immediately back within a few mins.

I am desperate to get this fixed as I cannot use wireless all of the time. Intel can you please fix the 82579LM driver to make it fully compatible with Windows 8 Pro 64-bit. I'm sure many other people out there are having the same issue and just don't know the cause, or put up with it it as real time applications such as audio are less important to them. I have read about other people having these issues and it only appears to be with Windows 8. I think the drivers are fine for Windows 7, although I haven't confirmed this for sure.

Intel please consider patching the 82579LM NIC driver ASAP for full Windows 8 support. I can assist in providing you information if you require as I'm very keen to get this sorted.

Thanks,

Brad

<><> Apologies if this has been posted in the wrong place <><>

Ok I'll keep this brief.

Problem:- LAN regulary disconnects and reconnets 30 seconds later.

Symptons:- Loose connection to Lan / Internet for around 30 seconds.

Background:- Had this problem with both P8P67 B2 and P8P67 pro boards. I have several other computers connected to the switch (not hub) and they are working fine. Have replaced the lead to no avail. Have even used the same lead in several other computers which works fine.

Config:-

Study

Netgear 8 port SWITCH 10/100/1000
Server
VOIP
PC

Switch connected to lounge hard wired via outdoor sheilded cat6 lead.

Lounge

Netgear 8 port SWITCH 10/100/1000
Router
XBOX 360
Wii
<><><>

Message in System Event Logs;-

<><>
Warning message - date time - source = e1cexpress
Event ID = 27

Intel 82579V Gigabit Network Connection
- Network link is disconnected
<><>

Then it states its connected again.

Have also tried the following;-

Remove Kaspersky 2011
Ensure ALL power management even OS is disabled
Use IPV4 instead of IPv6 in prefix policies
Disable nativue IPv6
Disable tunnel IPv6
Disable IPv6

netsh interface tcp set global rss=disabled
netsh interface tcp set global autotuninglevel=disabled
netsh int ip set global taskoffload=disabled

Disabled SNP;-
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Servic es\Tcpip\Parameters]
EnableTCPChimney=dword:00000000
EnableTCPA=dword:00000000
EnableRSS=dword:00000000

Have tried driver from Asus MB CD, Asus Website, Your Website, Windows Update all to no avail.

Please help.

Hi all,

We are facing a peculiar problem when connecting particular NICs to particular switches. The NICs will go off-line for 4-5 seconds, in irregular intervals, and then return to service as if nothing had happened. The weird thing is, we see this only on particular combinations of NICs and switches:

- Intel 82599EB, 8086:151c, only work reliably on a Nexus 4900M switch. When used on a Nexus 3064, we get a lot of those:

Sep  2 14:06:16 host kernel: ixgbe 0000:04:00.0: eth0: NIC Link is Down
Sep  2 14:06:21 host kernel: ixgbe 0000:04:00.0: eth0: NIC Link is Up 10 Gbps, Flow Control: RX/TX
Sep  2 14:06:21 host kernel: ixgbe 0000:04:00.0: eth0: NIC Link is Down
Sep  2 14:06:23 host kernel: ixgbe 0000:04:00.0: eth0: NIC Link is Up 10 Gbps, Flow Control: RX/TX

- Intel X540-AT2, 8086:1528, only work reliably on a Nexus 3064, When used on a Nexus 4900M, we observe the above.

All servers in question are running CentOS6. Those that are Dell have all the latest firmware and BIOS updates installed. We even tested the (then) latest Linux drivers, downloaded directly from Intel, over the ones that come with the OS, but it made no difference. Other machines in the mix are HP and custom-built, and all have one or the other NIC card.

Are there any debug tools for the NICs that could be useful here? Are there any particular options that should or should not be set?

Thanks.

Hi,

We have 5 systems now wich lost communication. It happend random and we do not now where to search.

Event ID: 56

Event Source: e1qexpress

Event Type: Information

Event Description: Intel(R) 82574L Gigabit Network Connection.  The network driver has been stopped because the network adapter has been removed.

Hi,

I am trying to create  teaming between two intel adapters that i have previously teamed before many times. But this time, I get this message:

"The specified adapter(s) could not be used to create a team. Use the `Team_ValidateAdaptersForTeaming' command to get the warning messages resulting from this action."

After doing above i get no error/warning messages. I have uninstalled and reinstalled the driver, but still getting the same result any ideas to solve this issue.

Thanks.

I am trying to enable a intel x520 10 Gb adapter to pxe boot.  Its a PCI add on card.  this is a bare bone systems that will be installed via PXE from the intel x520 card.  the system has no OS.  Has anyone encounter this issue before.  the instructions all point to and OS installed and runnning the utility,  The problem is it doesnt work with esxi5.0 and I tried with a boot iso which didnt work.  any thoughts

Hello All,

I am trying to install Windows XP on a HP ZBook 17 but unfortunately I am unable to find the drivers for the Intel Ethernet Connection I217-LM

I tried searching it every where contacted HP support but they are unable to help. The network adapter present in the laptop is the Intel Ethernet Connection I217-LM.

Will be really glad if some one helps me to sort this out. I need this up and running as one of the application which I use supports only XP. I have been trying to find this driver for more than a year now

Thanks and Regards,

Marley.

In the link below the pdf states some interesting figures but does not point to details about the signatures nor the test data. Where would this test data be located on the Intel site?

http://www.intel.com/content/dam/www/public/us/en/documents/white-papers/160gbps-dpi-performance-using-intel-architectur…

hi, i would like to report that the new intel nic drivers version 19.3 that just released recently has huge 6000+ dpc latency spike once in a few secs.

my specs

Intel(R) 82579LM Gigabit Network Connection

windows 7 SP1 32bit + lastest windows update

i downgrade to intel nic drivers previous version 19.1 and the problem is just gone.

Hi there,

I've been having some trouble getting igb/i354 to enable multiple queues.

Despite compiling the latest igb module (5.2.9.4 at the time of writing this) I have not been able to enable it.

I have ensured that MSI-X interrupts are used, and even set RSS values to 8 (and IntMode to 2 to be safe again) and rebuilt initrd and have googled extensively as well as followed all the information/advice I've seen in intel's documentation for installing the modules. The kernel I am running is 2.6.32 on a proxmox installation (though I tried with a 3.10 kernel as well with same results).

The motherboard is a Supermicro A1SRi-2758F atom server board and there is nothing I can see in the BIOS that looks like it could be causing this issue.

I am starting to think that I am missing something obvious here...

Any help/advice would be much appreciated.

Regards,

Iakovos

From lspci ( lspci -vv at the bottom of this post due to size):

00:00.0 Host bridge: Intel Corporation Atom processor C2000 SoC Transaction Router (rev 02)

00:01.0 PCI bridge: Intel Corporation Atom processor C2000 PCIe Root Port 1 (rev 02)

00:02.0 PCI bridge: Intel Corporation Atom processor C2000 PCIe Root Port 2 (rev 02)

00:03.0 PCI bridge: Intel Corporation Atom processor C2000 PCIe Root Port 3 (rev 02)

00:0b.0 Co-processor: Intel Corporation Atom processor C2000 nCPM (rev 02)

00:0e.0 Host bridge: Intel Corporation Atom processor C2000 RAS (rev 02)

00:0f.0 IOMMU: Intel Corporation Atom processor C2000 RCEC (rev 02)

00:13.0 System peripheral: Intel Corporation Atom processor C2000 SMBus 2.0 (rev 02)

00:14.0 Ethernet controller: Intel Corporation Ethernet Connection I354 (rev 03)

00:14.1 Ethernet controller: Intel Corporation Ethernet Connection I354 (rev 03)

00:14.2 Ethernet controller: Intel Corporation Ethernet Connection I354 (rev 03)

00:14.3 Ethernet controller: Intel Corporation Ethernet Connection I354 (rev 03)

00:16.0 USB controller: Intel Corporation Atom processor C2000 USB Enhanced Host Controller (rev 02)

00:17.0 SATA controller: Intel Corporation Atom processor C2000 AHCI SATA2 Controller (rev 02)

00:18.0 SATA controller: Intel Corporation Atom processor C2000 AHCI SATA3 Controller (rev 02)

00:1f.0 ISA bridge: Intel Corporation Atom processor C2000 PCU (rev 02)

00:1f.3 SMBus: Intel Corporation Atom processor C2000 PCU SMBus (rev 02)

01:00.0 PCI bridge: ASPEED Technology, Inc. AST1150 PCI-to-PCI Bridge (rev 03)

02:00.0 VGA compatible controller: ASPEED Technology, Inc. ASPEED Graphics Family (rev 30)

03:00.0 USB controller: Renesas Technology Corp. uPD720201 USB 3.0 Host Controller (rev 03)

From dmesg:

igb 0000:00:14.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20

igb 0000:00:14.0: setting latency timer to 64

igb 0000:00:14.0: irq 35 for MSI/MSI-X

igb 0000:00:14.0: irq 36 for MSI/MSI-X

igb 0000:00:14.0: Intel(R) Gigabit Ethernet Network Connection

igb 0000:00:14.0: eth0: (PCIe:integrated:integrated)

igb 0000:00:14.0: eth0: MAC: 0c:c4:7a:xx:xx:xx

igb 0000:00:14.0: eth0: PBA No: 010A00-000

igb 0000:00:14.0: LRO is disabled

igb 0000:00:14.0: Using MSI-X interrupts. 1 rx queue(s), 1 tx queue(s)

igb 0000:00:14.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21

igb 0000:00:14.1: setting latency timer to 64

igb 0000:00:14.1: irq 38 for MSI/MSI-X

igb 0000:00:14.1: irq 39 for MSI/MSI-X

igb 0000:00:14.1: Intel(R) Gigabit Ethernet Network Connection

igb 0000:00:14.1: eth1: (PCIe:integrated:integrated)

igb 0000:00:14.1: eth1: MAC: 0c:c4:7a:xx:xx:xx

igb 0000:00:14.1: eth1: PBA No: 010A00-000

igb 0000:00:14.1: LRO is disabled

igb 0000:00:14.1: Using MSI-X interrupts. 1 rx queue(s), 1 tx queue(s)

igb 0000:00:14.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22

igb 0000:00:14.2: setting latency timer to 64

igb 0000:00:14.2: irq 41 for MSI/MSI-X

igb 0000:00:14.2: irq 42 for MSI/MSI-X

igb 0000:00:14.2: Intel(R) Gigabit Ethernet Network Connection

igb 0000:00:14.2: eth2: (PCIe:integrated:integrated)

igb 0000:00:14.2: eth2: MAC: 0c:c4:7a:xx:xx:xx

igb 0000:00:14.2: eth2: PBA No: 010A00-000

igb 0000:00:14.2: LRO is disabled

igb 0000:00:14.2: Using MSI-X interrupts. 1 rx queue(s), 1 tx queue(s)

igb 0000:00:14.3: PCI INT D -> GSI 23 (level, low) -> IRQ 23

igb 0000:00:14.3: setting latency timer to 64

igb 0000:00:14.3: irq 43 for MSI/MSI-X

igb 0000:00:14.3: irq 44 for MSI/MSI-X

igb 0000:00:14.3: Intel(R) Gigabit Ethernet Network Connection

igb 0000:00:14.3: eth3: (PCIe:integrated:integrated)

igb 0000:00:14.3: eth3: MAC: 0c:c4:7a:xx:xx:xx

igb 0000:00:14.3: eth3: PBA No: 010A00-000

igb 0000:00:14.3: LRO is disabled

igb 0000:00:14.3: Using MSI-X interrupts. 1 rx queue(s), 1 tx queue(s)

igb 0000:00:14.0: eth0: igb: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX

igb 0000:00:14.1: eth1: igb: eth1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX

igb 0000:00:14.2: eth2: igb: eth2 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX

igb 0000:00:14.3: eth3: igb: eth3 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX

From cat /proc/interrupts |grep eth:

35:          0          0          0          0          0          0          1          0   PCI-MSI-edge      eth0

36:        919        901        926        916        920        936        882        904   PCI-MSI-edge      eth0-TxRx-0

38:          0          1          0          0          0          0          0          0   PCI-MSI-edge      eth1

39:        589        629        635        616        609        582        609        615   PCI-MSI-edge      eth1-TxRx-0

41:          0          0          0          0          0          1          0          0   PCI-MSI-edge      eth2

42:        644        620        577        604        602        616        603        615   PCI-MSI-edge      eth2-TxRx-0

43:          0          0          1          0          0          0          0          0   PCI-MSI-edge      eth3

44:        599        593        601        618        600        592        640        630   PCI-MSI-edge      eth3-TxRx-0

Values I am passing on modules.conf & modprobe.d/options (for 2.6/3.x):

igb RSS=8,8,8,8 IntMode=2,2,2,2

# modinfo igb

filename:       /lib/modules/2.6.32-32-pve/kernel/drivers/net/igb/igb.ko

version:        5.2.9.4

license:        GPL

description:    Intel(R) Gigabit Ethernet Network Driver

author:         Intel Corporation, <e1000-devel@lists.sourceforge.net>

srcversion:     E377200391EBF74638FEDA2

alias:          pci:v00008086d000010D6sv*sd*bc*sc*i*

alias:          pci:v00008086d000010A9sv*sd*bc*sc*i*

alias:          pci:v00008086d000010A7sv*sd*bc*sc*i*

alias:          pci:v00008086d000010E8sv*sd*bc*sc*i*

alias:          pci:v00008086d00001526sv*sd*bc*sc*i*

alias:          pci:v00008086d0000150Dsv*sd*bc*sc*i*

alias:          pci:v00008086d000010E7sv*sd*bc*sc*i*

alias:          pci:v00008086d000010E6sv*sd*bc*sc*i*

alias:          pci:v00008086d00001518sv*sd*bc*sc*i*

alias:          pci:v00008086d0000150Asv*sd*bc*sc*i*

alias:          pci:v00008086d000010C9sv*sd*bc*sc*i*

alias:          pci:v00008086d00000440sv*sd*bc*sc*i*

alias:          pci:v00008086d0000043Csv*sd*bc*sc*i*

alias:          pci:v00008086d0000043Asv*sd*bc*sc*i*

alias:          pci:v00008086d00000438sv*sd*bc*sc*i*

alias:          pci:v00008086d00001516sv*sd*bc*sc*i*

alias:          pci:v00008086d00001511sv*sd*bc*sc*i*

alias:          pci:v00008086d00001510sv*sd*bc*sc*i*

alias:          pci:v00008086d00001527sv*sd*bc*sc*i*

alias:          pci:v00008086d0000150Fsv*sd*bc*sc*i*

alias:          pci:v00008086d0000150Esv*sd*bc*sc*i*

alias:          pci:v00008086d00001524sv*sd*bc*sc*i*

alias:          pci:v00008086d00001523sv*sd*bc*sc*i*

alias:          pci:v00008086d00001522sv*sd*bc*sc*i*

alias:          pci:v00008086d00001521sv*sd*bc*sc*i*

alias:          pci:v00008086d00001539sv*sd*bc*sc*i*

alias:          pci:v00008086d0000157Csv*sd*bc*sc*i*

alias:          pci:v00008086d0000157Bsv*sd*bc*sc*i*

alias:          pci:v00008086d00001538sv*sd*bc*sc*i*

alias:          pci:v00008086d00001537sv*sd*bc*sc*i*

alias:          pci:v00008086d00001536sv*sd*bc*sc*i*

alias:          pci:v00008086d00001533sv*sd*bc*sc*i*

alias:          pci:v00008086d00001F45sv*sd*bc*sc*i*

alias:          pci:v00008086d00001F41sv*sd*bc*sc*i*

alias:          pci:v00008086d00001F40sv*sd*bc*sc*i*

depends:        i2c-core,dca,i2c-algo-bit

vermagic:       2.6.32-32-pve SMP mod_unload modversions

parm:           InterruptThrottleRate:Maximum interrupts per second, per vector, (max 100000), default 3=adaptive (array of int)

parm:           IntMode:Change Interrupt Mode (0=Legacy, 1=MSI, 2=MSI-X), default 2 (array of int)

parm:           Node:set the starting node to allocate memory on, default -1 (array of int)

parm:           LLIPort:Low Latency Interrupt TCP Port (0-65535), default 0=off (array of int)

parm:           LLIPush:Low Latency Interrupt on TCP Push flag (0,1), default 0=off (array of int)

parm:           LLISize:Low Latency Interrupt on Packet Size (0-1500), default 0=off (array of int)

parm:           RSS:Number of Receive-Side Scaling Descriptor Queues (0-8), default 1, 0=number of cpus (array of int)

parm:           VMDQ:Number of Virtual Machine Device Queues: 0-1 = disable, 2-8 enable, default 0 (array of int)

parm:           max_vfs:Number of Virtual Functions: 0 = disable, 1-7 enable, default 0 (array of int)

parm:           MDD:Malicious Driver Detection (0/1), default 1 = enabled. Only available when max_vfs is greater than 0 (array of int)

parm:           QueuePairs:Enable Tx/Rx queue pairs for interrupt handling (0,1), default 1=on (array of int)

parm:           EEE:Enable/disable on parts that support the feature (array of int)

parm:           DMAC:Disable or set latency for DMA Coalescing ((0=off, 1000-10000(msec), 250, 500 (usec)) (array of int)

parm:           LRO:Large Receive Offload (0,1), default 0=off (array of int)

parm:           debug:Debug level (0=none, ..., 16=all) (int)

# lspci -vv

00:00.0 Host bridge: Intel Corporation Atom processor C2000 SoC Transaction Router (rev 02)

  Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-

  Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

  Latency: 0

00:01.0 PCI bridge: Intel Corporation Atom processor C2000 PCIe Root Port 1 (rev 02) (prog-if 00 [Normal decode])

  Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+

  Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

  Latency: 0, Cache Line Size: 64 bytes

  Region 0: Memory at df2e0000 (64-bit, non-prefetchable) [size=128K]

  Bus: primary=00, secondary=01, subordinate=02, sec-latency=0

  I/O behind bridge: 0000d000-0000dfff

  Memory behind bridge: de000000-df0fffff

  Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-

  BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B-

  PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-

  Capabilities: [40] Express (v2) Root Port (Slot+), MSI 00

  DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us

  ExtTag+ RBE+ FLReset-

  DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+

  RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-

  MaxPayload 128 bytes, MaxReadReq 512 bytes

  DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-

  LnkCap: Port #1, Speed 5GT/s, Width x4, ASPM L1, Latency L0 <1us, L1 <4us

  ClockPM- Surprise+ LLActRep+ BwNot+

  LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+

  ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-

  LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt+ ABWMgmt-

  SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise-

  Slot #0, PowerLimit 25.000W; Interlock- NoCompl-

  SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-

  Control: AttnInd Off, PwrInd Off, Power- Interlock-

  SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-

  Changed: MRL- PresDet- LinkState-

  RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-

  RootCap: CRSVisible-

  RootSta: PME ReqID 0000, PMEStatus- PMEPending-

  DevCap2: Completion Timeout: Range ABC, TimeoutDis+ ARIFwd+

  DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- ARIFwd-

  LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB

  Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-

  Compliance De-emphasis: -6dB

  LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete-, EqualizationPhase1-

  EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-

  Capabilities: [80] Power Management version 3

  Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)

  Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-

  Capabilities: [88] Subsystem: Intel Corporation Device 7270

  Capabilities: [90] MSI: Enable+ Count=1/1 Maskable+ 64bit-

  Address: feeff00c  Data: 4169

  Masking: 00000000  Pending: 00000000

  Capabilities: [100 v1] Advanced Error Reporting

  UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-

  UEMsk: DLP+ SDES+ TLP+ FCP+ CmpltTO+ CmpltAbrt+ UnxCmplt+ RxOF+ MalfTLP+ ECRC- UnsupReq+ ACSViol+

  UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-

  CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-

  CEMsk: RxErr+ BadTLP+ BadDLLP+ Rollover+ Timeout+ NonFatalErr+

  AERCap: First Error Pointer: 00, GenCap- CGenEn- ChkCap- ChkEn-

  Kernel driver in use: pcieport

00:02.0 PCI bridge: Intel Corporation Atom processor C2000 PCIe Root Port 2 (rev 02) (prog-if 00 [Normal decode])

  Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+

  Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

  Latency: 0, Cache Line Size: 64 bytes

  Region 0: Memory at df2c0000 (64-bit, non-prefetchable) [size=128K]

  Bus: primary=00, secondary=03, subordinate=03, sec-latency=0

  Memory behind bridge: df100000-df1fffff

  Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-

  BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-

  PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-

  Capabilities: [40] Express (v2) Root Port (Slot+), MSI 00

  DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us

  ExtTag+ RBE+ FLReset-

  DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+

  RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-

  MaxPayload 128 bytes, MaxReadReq 512 bytes

  DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-

  LnkCap: Port #2, Speed 5GT/s, Width x4, ASPM L1, Latency L0 <1us, L1 <4us

  ClockPM- Surprise+ LLActRep+ BwNot+

  LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+

  ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-

  LnkSta: Speed 5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt+ ABWMgmt+

  SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise-

  Slot #1, PowerLimit 25.000W; Interlock- NoCompl-

  SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-

  Control: AttnInd Off, PwrInd Off, Power- Interlock-

  SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-

  Changed: MRL- PresDet- LinkState-

  RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-

  RootCap: CRSVisible-

  RootSta: PME ReqID 0000, PMEStatus- PMEPending-

  DevCap2: Completion Timeout: Range ABC, TimeoutDis+ ARIFwd+

  DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- ARIFwd-

  LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB

  Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-

  Compliance De-emphasis: -6dB

  LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete-, EqualizationPhase1-

  EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-

  Capabilities: [80] Power Management version 3

  Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)

  Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-

  Capabilities: [88] Subsystem: Intel Corporation Device 7270

  Capabilities: [90] MSI: Enable+ Count=1/1 Maskable+ 64bit-

  Address: feeff00c  Data: 4171

  Masking: 00000000  Pending: 00000000

  Capabilities: [100 v1] Advanced Error Reporting

  UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-

  UEMsk: DLP+ SDES+ TLP+ FCP+ CmpltTO+ CmpltAbrt+ UnxCmplt+ RxOF+ MalfTLP+ ECRC- UnsupReq+ ACSViol+

  UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-

  CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-

  CEMsk: RxErr+ BadTLP+ BadDLLP+ Rollover+ Timeout+ NonFatalErr+

  AERCap: First Error Pointer: 00, GenCap- CGenEn- ChkCap- ChkEn-

  Kernel driver in use: pcieport

00:03.0 PCI bridge: Intel Corporation Atom processor C2000 PCIe Root Port 3 (rev 02) (prog-if 00 [Normal decode])

  Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+

  Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

  Latency: 0, Cache Line Size: 64 bytes

  Region 0: Memory at df2a0000 (64-bit, non-prefetchable) [size=128K]

  Bus: primary=00, secondary=04, subordinate=04, sec-latency=0

  Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-

  BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-

  PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-

  Capabilities: [40] Express (v2) Root Port (Slot+), MSI 00

  DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us

  ExtTag+ RBE+ FLReset-

  DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+

  RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-

  MaxPayload 256 bytes, MaxReadReq 512 bytes

  DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-

  LnkCap: Port #3, Speed 5GT/s, Width x8, ASPM L1, Latency L0 <1us, L1 <4us

  ClockPM- Surprise+ LLActRep+ BwNot+

  LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+

  ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-

  LnkSta: Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-

  SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise-

  Slot #2, PowerLimit 25.000W; Interlock- NoCompl-

  SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-

  Control: AttnInd Off, PwrInd Off, Power- Interlock-

  SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock-

  Changed: MRL- PresDet- LinkState-

  RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-

  RootCap: CRSVisible-

  RootSta: PME ReqID 0000, PMEStatus- PMEPending-

  DevCap2: Completion Timeout: Range ABC, TimeoutDis+ ARIFwd+

  DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- ARIFwd-

  LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB

  Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-

  Compliance De-emphasis: -6dB

  LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete-, EqualizationPhase1-

  EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-

  Capabilities: [80] Power Management version 3

  Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)

  Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-

  Capabilities: [88] Subsystem: Intel Corporation Device 7270

  Capabilities: [90] MSI: Enable+ Count=1/1 Maskable+ 64bit-

  Address: feeff00c  Data: 4179

  Masking: 00000000  Pending: 00000000

  Capabilities: [100 v1] Advanced Error Reporting

  UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-

  UEMsk: DLP+ SDES+ TLP+ FCP+ CmpltTO+ CmpltAbrt+ UnxCmplt+ RxOF+ MalfTLP+ ECRC- UnsupReq+ ACSViol+

  UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-

  CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-

  CEMsk: RxErr+ BadTLP+ BadDLLP+ Rollover+ Timeout+ NonFatalErr+

  AERCap: First Error Pointer: 00, GenCap- CGenEn- ChkCap- ChkEn-

  Kernel driver in use: pcieport

00:0b.0 Co-processor: Intel Corporation Atom processor C2000 nCPM (rev 02)

  Subsystem: Intel Corporation Device 0000

  Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-

  Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

  Latency: 0, Cache Line Size: 64 bytes

  Interrupt: pin A routed to IRQ 255

  Region 2: Memory at df280000 (64-bit, non-prefetchable) [size=128K]

  Region 4: Memory at df310000 (64-bit, non-prefetchable) [size=16K]

  Capabilities: [b0] MSI: Enable- Count=1/1 Maskable+ 64bit+

  Address: 0000000000000000  Data: 0000

  Masking: 00000000  Pending: 00000000

  Capabilities: [60] MSI-X: Enable- Count=17 Masked-

  Vector table: BAR=2 offset=0001b000

  PBA: BAR=2 offset=0001b800

  Capabilities: [6c] Power Management version 3

  Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)

  Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-

  Capabilities: [74] Express (v2) Root Complex Integrated Endpoint, MSI 00

  DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <128ns, L1 <1us

  ExtTag- RBE+ FLReset+

  DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported-

  RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+

  MaxPayload 256 bytes, MaxReadReq 512 bytes

  DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-

  LnkCap: Port #0, Speed unknown, Width x0, ASPM unknown, Latency L0 <64ns, L1 <1us

  ClockPM- Surprise- LLActRep- BwNot-

  LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk-

  ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-

  LnkSta: Speed unknown, Width x0, TrErr- Train- SlotClk- DLActive- BWMgmt- ABWMgmt-

  DevCap2: Completion Timeout: Range B, TimeoutDis+

  DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-

  LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB

  Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-

  Compliance De-emphasis: -6dB

  LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete-, EqualizationPhase1-

  EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-

  Capabilities: [100 v1] Advanced Error Reporting

  UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-

  UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-

  UESvrt: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP+ ECRC- UnsupReq- ACSViol-

  CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-

  CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+

  AERCap: First Error Pointer: 00, GenCap- CGenEn- ChkCap- ChkEn-

00:0e.0 Host bridge: Intel Corporation Atom processor C2000 RAS (rev 02)

  Subsystem: Intel Corporation Device 0000

  Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-

  Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

  Capabilities: [40] Express (v2) Root Complex Integrated Endpoint, MSI 00

  DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us

  ExtTag- RBE- FLReset-

  DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-

  RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-

  MaxPayload 256 bytes, MaxReadReq 128 bytes

  DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-

  LnkCap: Port #0, Speed unknown, Width x0, ASPM unknown, Latency L0 <64ns, L1 <1us

  ClockPM- Surprise- LLActRep- BwNot-

  LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk-

  ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-

  LnkSta: Speed unknown, Width x0, TrErr- Train- SlotClk- DLActive- BWMgmt- ABWMgmt-

  DevCap2: Completion Timeout: Not Supported, TimeoutDis-

  DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-

  LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB

  Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-

  Compliance De-emphasis: -6dB

  LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete-, EqualizationPhase1-

  EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-

00:0f.0 IOMMU: Intel Corporation Atom processor C2000 RCEC (rev 02)

  Subsystem: Intel Corporation Device 0000

  Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-

  Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

  Latency: 0, Cache Line Size: 64 bytes

  Interrupt: pin A routed to IRQ 11

  Capabilities: [40] Express (v2) Root Complex Event Collector, MSI 00

  DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us

  ExtTag- RBE- FLReset-

  DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported-

  RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-

  MaxPayload 256 bytes, MaxReadReq 128 bytes

  DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr- TransPend-

  LnkCap: Port #0, Speed unknown, Width x0, ASPM unknown, Latency L0 <64ns, L1 <1us

  ClockPM- Surprise- LLActRep- BwNot-

  LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk-

  ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-

  LnkSta: Speed unknown, Width x0, TrErr- Train- SlotClk- DLActive- BWMgmt- ABWMgmt-

  DevCap2: Completion Timeout: Not Supported, TimeoutDis-

  DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-

  LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB

  Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-

  Compliance De-emphasis: -6dB

  LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete-, EqualizationPhase1-

  EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-

  Capabilities: [80] Power Management version 3

  Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)

  Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-

  Capabilities: [90] MSI: Enable- Count=1/1 Maskable+ 64bit-

  Address: 00000000  Data: 0000

  Masking: 00000000  Pending: 00000000

  Capabilities: [100 v1] Advanced Error Reporting

  UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-

  UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-

  UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-

  CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+

  CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+

  AERCap: First Error Pointer: 00, GenCap- CGenEn- ChkCap- ChkEn-

  Capabilities: [150 v1] Root Complex Event Collector <?>

00:13.0 System peripheral: Intel Corporation Atom processor C2000 SMBus 2.0 (rev 02)

  Subsystem: Intel Corporation Device 0000

  Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+

  Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

  Latency: 0

  Interrupt: pin A routed to IRQ 45

  Region 0: Memory at df318000 (64-bit, non-prefetchable) [size=1K]

  Capabilities: [40] Express (v2) Root Complex Integrated Endpoint, MSI 00

  DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us

  ExtTag- RBE+ FLReset+

  DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported-

  RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+

  MaxPayload 256 bytes, MaxReadReq 128 bytes

  DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-

  LnkCap: Port #0, Speed unknown, Width x0, ASPM unknown, Latency L0 <64ns, L1 <1us

  ClockPM- Surprise- LLActRep- BwNot-

  LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk-

  ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-

  LnkSta: Speed unknown, Width x0, TrErr- Train- SlotClk- DLActive- BWMgmt- ABWMgmt-

  DevCap2: Completion Timeout: Not Supported, TimeoutDis+

  DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-

  LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB

  Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-

  Compliance De-emphasis: -6dB

  LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete-, EqualizationPhase1-

  EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-

  Capabilities: [80] Power Management version 3

  Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)

  Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-

  Capabilities: [8c] MSI: Enable+ Count=1/1 Maskable+ 64bit+

  Address: 00000000feeff00c  Data: 4182

  Masking: 00000000  Pending: 00000000

  Capabilities: [100 v1] Advanced Error Reporting

  UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-

  UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-

  UESvrt: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP+ ECRC- UnsupReq- ACSViol-

  CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-

  CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+

  AERCap: First Error Pointer: 00, GenCap- CGenEn- ChkCap- ChkEn-

  Kernel driver in use: ismt_smbus

00:14.0 Ethernet controller: Intel Corporation Ethernet Connection I354 (rev 03)

  Subsystem: Super Micro Computer Inc Device 1f41

  Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+

  Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

  Latency: 0, Cache Line Size: 64 bytes

  Interrupt: pin A routed to IRQ 20

  Region 0: Memory at df260000 (64-bit, non-prefetchable) [size=128K]

  Region 2: I/O ports at e0c0 [size=32]

  Region 4: Memory at df30c000 (64-bit, non-prefetchable) [size=16K]

  Capabilities: [40] Power Management version 3

  Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)

  Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=1 PME-

  Capabilities: [50] MSI: Enable- Count=1/1 Maskable+ 64bit+

  Address: 0000000000000000  Data: 0000

  Masking: 00000000  Pending: 00000000

  Capabilities: [70] MSI-X: Enable+ Count=10 Masked-

  Vector table: BAR=4 offset=00000000

  PBA: BAR=4 offset=00002000

  Capabilities: [a0] Express (v2) Root Complex Integrated Endpoint, MSI 00

  DevCap: MaxPayload 512 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us

  ExtTag- RBE+ FLReset+

  DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+

  RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+

  MaxPayload 512 bytes, MaxReadReq 512 bytes

  DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-

  LnkCap: Port #0, Speed unknown, Width x0, ASPM unknown, Latency L0 <64ns, L1 <1us

  ClockPM- Surprise- LLActRep- BwNot-

  LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk-

  ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-

  LnkSta: Speed unknown, Width x0, TrErr- Train- SlotClk- DLActive- BWMgmt- ABWMgmt-

  DevCap2: Completion Timeout: Range ABCD, TimeoutDis+

  DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-

  LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB

  Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-

  Compliance De-emphasis: -6dB

  LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete-, EqualizationPhase1-

  EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-

  Capabilities: [100 v2] Advanced Error Reporting

  UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-

  UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-

  UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-

  CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-

  CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+

  AERCap: First Error Pointer: 00, GenCap- CGenEn- ChkCap- ChkEn-

  Capabilities: [140 v1] Device Serial Number 0c-c4-7a-ff-ff-xx-xx-xx

  Capabilities: [1a0 v1] Transaction Processing Hints

  Device specific mode supported

  Steering table in TPH capability structure

  Capabilities: [1d0 v1] Access Control Services

  ACSCap: SrcValid- TransBlk- ReqRedir- CmpltRedir- UpstreamFwd- EgressCtrl- DirectTrans-

  ACSCtl: SrcValid- TransBlk- ReqRedir- CmpltRedir- UpstreamFwd- EgressCtrl- DirectTrans-

  Kernel driver in use: igb

00:14.1 Ethernet controller: Intel Corporation Ethernet Connection I354 (rev 03)

  Subsystem: Super Micro Computer Inc Device 1f41

  Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+

  Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

  Latency: 0, Cache Line Size: 64 bytes

  Interrupt: pin B routed to IRQ 21

  Region 0: Memory at df240000 (64-bit, non-prefetchable) [size=128K]

  Region 2: I/O ports at e0a0 [size=32]

  Region 4: Memory at df308000 (64-bit, non-prefetchable) [size=16K]

  Capabilities: [40] Power Management version 3

  Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)

  Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=1 PME-

  Capabilities: [50] MSI: Enable- Count=1/1 Maskable+ 64bit+

  Address: 0000000000000000  Data: 0000

  Masking: 00000000  Pending: 00000000

  Capabilities: [70] MSI-X: Enable+ Count=10 Masked-

  Vector table: BAR=4 offset=00000000

  PBA: BAR=4 offset=00002000

  Capabilities: [a0] Express (v2) Root Complex Integrated Endpoint, MSI 00

  DevCap: MaxPayload 512 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us

  ExtTag- RBE+ FLReset+

  DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+

  RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+

  MaxPayload 512 bytes, MaxReadReq 512 bytes

  DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-

  LnkCap: Port #0, Speed unknown, Width x0, ASPM unknown, Latency L0 <64ns, L1 <1us

  ClockPM- Surprise- LLActRep- BwNot-

  LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk-

  ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-

  LnkSta: Speed unknown, Width x0, TrErr- Train- SlotClk- DLActive- BWMgmt- ABWMgmt-

  DevCap2: Completion Timeout: Range ABCD, TimeoutDis+

  DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-

  LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB

  Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-

  Compliance De-emphasis: -6dB

  LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete-, EqualizationPhase1-

  EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-

  Capabilities: [100 v2] Advanced Error Reporting

  UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-

  UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-

  UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-

  CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-

  CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+

  AERCap: First Error Pointer: 00, GenCap- CGenEn- ChkCap- ChkEn-

  Capabilities: [140 v1] Device Serial Number 0c-c4-7a-ff-ff-xx-xx-xx

  Capabilities: [1a0 v1] Transaction Processing Hints

  Device specific mode supported

  Steering table in TPH capability structure

  Capabilities: [1d0 v1] Access Control Services

  ACSCap: SrcValid- TransBlk- ReqRedir- CmpltRedir- UpstreamFwd- EgressCtrl- DirectTrans-

  ACSCtl: SrcValid- TransBlk- ReqRedir- CmpltRedir- UpstreamFwd- EgressCtrl- DirectTrans-

  Kernel driver in use: igb

00:14.2 Ethernet controller: Intel Corporation Ethernet Connection I354 (rev 03)

  Subsystem: Super Micro Computer Inc Device 1f41

  Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+

  Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

  Latency: 0, Cache Line Size: 64 bytes

  Interrupt: pin C routed to IRQ 22

  Region 0: Memory at df220000 (64-bit, non-prefetchable) [size=128K]

  Region 2: I/O ports at e080 [size=32]

  Region 4: Memory at df304000 (64-bit, non-prefetchable) [size=16K]

  Capabilities: [40] Power Management version 3

  Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)

  Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=1 PME-

  Capabilities: [50] MSI: Enable- Count=1/1 Maskable+ 64bit+

  Address: 0000000000000000  Data: 0000

  Masking: 00000000  Pending: 00000000

  Capabilities: [70] MSI-X: Enable+ Count=10 Masked-

  Vector table: BAR=4 offset=00000000

  PBA: BAR=4 offset=00002000

  Capabilities: [a0] Express (v2) Root Complex Integrated Endpoint, MSI 00

  DevCap: MaxPayload 512 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us

  ExtTag- RBE+ FLReset+

  DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+

  RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+

  MaxPayload 512 bytes, MaxReadReq 512 bytes

  DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-

  LnkCap: Port #0, Speed unknown, Width x0, ASPM unknown, Latency L0 <64ns, L1 <1us

  ClockPM- Surprise- LLActRep- BwNot-

  LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk-

  ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-

  LnkSta: Speed unknown, Width x0, TrErr- Train- SlotClk- DLActive- BWMgmt- ABWMgmt-

  DevCap2: Completion Timeout: Range ABCD, TimeoutDis+

  DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-

  LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB

  Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-

  Compliance De-emphasis: -6dB

  LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete-, EqualizationPhase1-

  EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-

  Capabilities: [100 v2] Advanced Error Reporting

  UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-

  UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-

  UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-

  CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-

  CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+

  AERCap: First Error Pointer: 00, GenCap- CGenEn- ChkCap- ChkEn-

  Capabilities: [140 v1] Device Serial Number 0c-c4-7a-ff-ff-xx-xx-xx

  Capabilities: [1a0 v1] Transaction Processing Hints

  Device specific mode supported

  Steering table in TPH capability structure

  Capabilities: [1d0 v1] Access Control Services

  ACSCap: SrcValid- TransBlk- ReqRedir- CmpltRedir- UpstreamFwd- EgressCtrl- DirectTrans-

  ACSCtl: SrcValid- TransBlk- ReqRedir- CmpltRedir- UpstreamFwd- EgressCtrl- DirectTrans-

  Kernel driver in use: igb

00:14.3 Ethernet controller: Intel Corporation Ethernet Connection I354 (rev 03)

  Subsystem: Super Micro Computer Inc Device 1f41

  Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+

  Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

  Latency: 0, Cache Line Size: 64 bytes

  Interrupt: pin D routed to IRQ 23

  Region 0: Memory at df200000 (64-bit, non-prefetchable) [size=128K]

  Region 2: I/O ports at e060 [size=32]

  Region 4: Memory at df300000 (64-bit, non-prefetchable) [size=16K]

  Capabilities: [40] Power Management version 3

  Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)

  Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=1 PME-

  Capabilities: [50] MSI: Enable- Count=1/1 Maskable+ 64bit+

  Address: 0000000000000000  Data: 0000

  Masking: 00000000  Pending: 00000000

  Capabilities: [70] MSI-X: Enable+ Count=10 Masked-

  Vector table: BAR=4 offset=00000000

  PBA: BAR=4 offset=00002000

  Capabilities: [a0] Express (v2) Root Complex Integrated Endpoint, MSI 00

  DevCap: MaxPayload 512 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us

  ExtTag- RBE+ FLReset+

  DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+

  RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+

  MaxPayload 512 bytes, MaxReadReq 512 bytes

  DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-

  LnkCap: Port #0, Speed unknown, Width x0, ASPM unknown, Latency L0 <64ns, L1 <1us

  ClockPM- Surprise- LLActRep- BwNot-

  LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk-

  ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-

  LnkSta: Speed unknown, Width x0, TrErr- Train- SlotClk- DLActive- BWMgmt- ABWMgmt-

  DevCap2: Completion Timeout: Range ABCD, TimeoutDis+

  DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-

  LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB

  Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-

  Compliance De-emphasis: -6dB

  LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete-, EqualizationPhase1-

  EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-

  Capabilities: [100 v2] Advanced Error Reporting

  UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-

  UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-

  UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-

  CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-

  CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+

  AERCap: First Error Pointer: 00, GenCap- CGenEn- ChkCap- ChkEn-

  Capabilities: [140 v1] Device Serial Number 0c-c4-7a-ff-ff-xx-xx-xx

  Capabilities: [1a0 v1] Transaction Processing Hints

  Device specific mode supported

  Steering table in TPH capability structure

  Capabilities: [1d0 v1] Access Control Services

  ACSCap: SrcValid- TransBlk- ReqRedir- CmpltRedir- UpstreamFwd- EgressCtrl- DirectTrans-

  ACSCtl: SrcValid- TransBlk- ReqRedir- CmpltRedir- UpstreamFwd- EgressCtrl- DirectTrans-

  Kernel driver in use: igb

00:16.0 USB controller: Intel Corporation Atom processor C2000 USB Enhanced Host Controller (rev 02) (prog-if 20 [EHCI])

  Subsystem: Intel Corporation Device 7270

  Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-

  Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

  Latency: 0

  Interrupt: pin A routed to IRQ 23

  Region 0: Memory at df317000 (32-bit, non-prefetchable) [size=1K]

  Capabilities: [50] Power Management version 3

  Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)

  Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-

  Capabilities: [58] Debug port: BAR=1 offset=00a0

  Capabilities: [98] PCI Advanced Features

  AFCap: TP+ FLR+

  AFCtrl: FLR-

  AFStatus: TP-

  Kernel driver in use: ehci_hcd

00:17.0 SATA controller: Intel Corporation Atom processor C2000 AHCI SATA2 Controller (rev 02) (prog-if 01 [AHCI 1.0])

  Subsystem: Intel Corporation Device 7270

  Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+

  Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

  Latency: 0

  Interrupt: pin A routed to IRQ 37

  Region 0: I/O ports at e150 [size=8]

  Region 1: I/O ports at e140 [size=4]

  Region 2: I/O ports at e130 [size=8]

  Region 3: I/O ports at e120 [size=4]

  Region 4: I/O ports at e040 [size=32]

  Region 5: Memory at df316000 (32-bit, non-prefetchable) [size=2K]

  Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-

  Address: feeff00c  Data: 41d9

  Capabilities: [70] Power Management version 3

  Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold-)

  Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-

  Capabilities: [a8] SATA HBA v1.0 BAR4 Offset=00000004

  Kernel driver in use: ahci

00:18.0 SATA controller: Intel Corporation Atom processor C2000 AHCI SATA3 Controller (rev 02) (prog-if 01 [AHCI 1.0])

  Subsystem: Intel Corporation Device 7270

  Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+

  Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

  Latency: 0

  Interrupt: pin A routed to IRQ 40

  Region 0: I/O ports at e110 [size=8]

  Region 1: I/O ports at e100 [size=4]

  Region 2: I/O ports at e0f0 [size=8]

  Region 3: I/O ports at e0e0 [size=4]

  Region 4: I/O ports at e020 [size=32]

  Region 5: Memory at df315000 (32-bit, non-prefetchable) [size=2K]

  Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-

  Address: feeff00c  Data: 4152

  Capabilities: [70] Power Management version 3

  Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold-)

  Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-

  Capabilities: [a8] SATA HBA v1.0 BAR4 Offset=00000004

  Kernel driver in use: ahci

00:1f.0 ISA bridge: Intel Corporation Atom processor C2000 PCU (rev 02)

  Subsystem: Intel Corporation Device 7270

  Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-

  Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

  Latency: 0

  Capabilities: [e0] Vendor Specific Information: Len=0c <?>

  Kernel driver in use: lpc_ich

00:1f.3 SMBus: Intel Corporation Atom processor C2000 PCU SMBus (rev 02)

  Subsystem: Intel Corporation Device 7270

  Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-

  Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

  Interrupt: pin B routed to IRQ 18

  Region 0: Memory at df314000 (32-bit, non-prefetchable) [size=32]

  Region 4: I/O ports at e000 [size=32]

  Kernel driver in use: i801_smbus

01:00.0 PCI bridge: ASPEED Technology, Inc. AST1150 PCI-to-PCI Bridge (rev 03) (prog-if 00 [Normal decode])

  Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-

  Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

  Latency: 0, Cache Line Size: 64 bytes

  Bus: primary=01, secondary=02, subordinate=02, sec-latency=32

  I/O behind bridge: 0000d000-0000dfff

  Memory behind bridge: de000000-df0fffff

  Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR-

  BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B-

  PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-

  Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit+

  Address: 0000000000000000  Data: 0000

  Capabilities: [78] Power Management version 3

  Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+)

  Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-

  Capabilities: [80] Express (v1) PCI/PCI-X Bridge, MSI 00

  DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us

  ExtTag+ AttnBtn- AttnInd- PwrInd- RBE- FLReset-

  DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported-

  RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+ BrConfRtry-

  MaxPayload 128 bytes, MaxReadReq 512 bytes

  DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-

  LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <2us, L1 <16us

  ClockPM- Surprise- LLActRep- BwNot-

  LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk+

  ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-

  LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-

  Capabilities: [a4] Subsystem: ASPEED Technology, Inc. AST1150 PCI-to-PCI Bridge

  Capabilities: [100 v1] Virtual Channel

  Caps: LPEVC=0 RefClk=100ns PATEntryBits=1

  Arb: Fixed- WRR32- WRR64- WRR128-

  Ctrl: ArbSelect=Fixed

  Status: InProgress-

  VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-

  Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-

  Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=01

  Status: NegoPending- InProgress-

02:00.0 VGA compatible controller: ASPEED Technology, Inc. ASPEED Graphics Family (rev 30) (prog-if 00 [VGA controller])

  Subsystem: Super Micro Computer Inc Device 0813

  Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-

  Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

  Latency: 0

  Interrupt: pin A routed to IRQ 11

  Region 0: Memory at de000000 (32-bit, non-prefetchable) [size=16M]

  Region 1: Memory at df000000 (32-bit, non-prefetchable) [size=128K]

  Region 2: I/O ports at d000 [size=128]

  Expansion ROM at <unassigned> [disabled]

  Capabilities: [40] Power Management version 3

  Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+)

  Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-

  Capabilities: [50] MSI: Enable- Count=1/4 Maskable- 64bit+

  Address: 0000000000000000  Data: 0000

03:00.0 USB controller: Renesas Technology Corp. uPD720201 USB 3.0 Host Controller (rev 03) (prog-if 30 [XHCI])

  Subsystem: Super Micro Computer Inc Device 0813

  Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+

  Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

  Latency: 0, Cache Line Size: 64 bytes

  Interrupt: pin A routed to IRQ 17

  Region 0: Memory at df100000 (64-bit, non-prefetchable) [size=8K]

  Capabilities: [50] Power Management version 3

  Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)

  Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-

  Capabilities: [70] MSI: Enable- Count=1/8 Maskable- 64bit+

  Address: 0000000000000000  Data: 0000

  Capabilities: [90] MSI-X: Enable+ Count=8 Masked-

  Vector table: BAR=0 offset=00001000

  PBA: BAR=0 offset=00001080

  Capabilities: [a0] Express (v2) Endpoint, MSI 00

  DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s unlimited, L1 unlimited

  ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-

  DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported-

  RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+

  MaxPayload 128 bytes, MaxReadReq 512 bytes

  DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-

  LnkCap: Port #0, Speed 5GT/s, Width x1, ASPM L0s L1, Latency L0 <4us, L1 unlimited

  ClockPM+ Surprise- LLActRep- BwNot-

  LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+

  ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-

  LnkSta: Speed 5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-

  DevCap2: Completion Timeout: Not Supported, TimeoutDis+

  DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-

  LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB

  Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-

  Compliance De-emphasis: -6dB

  LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete-, EqualizationPhase1-

  EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-

  Capabilities: [100 v1] Advanced Error Reporting

  UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-

  UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-

  UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-

  CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-

  CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+

  AERCap: First Error Pointer: 00, GenCap- CGenEn- ChkCap- ChkEn-

  Capabilities: [150 v1] Latency Tolerance Reporting

  Max snoop latency: 0ns

  Max no snoop latency: 0ns

  Kernel driver in use: xhci_hcd

Hi everybody,

I am unable to find Network drivers for Intel® I217LM Gigabit Network adapter for Windows Server 2008 Standard (32-bit). I have found the drivers for Windows Server 2008 R2 but that being 64-bit do not work.Kindly help me in sorting out this problem as I am stuck need to install the drivers.

Thanks in advance.

SHOAIB

Hello,

I am currently trying to implement an I210 solution to convert PCIe from an Atom Processor to a SGMII interface to connect to a Marvell 88E6176 Ethernet switch.

In this application I have the I2C and SMB bus connected to the Atom processor. Do I still need to connect the NC-SI interface to something?

If it is not needed then do I just leave the pins floating or how do I have to have them pulled up/down for proper operation.

Thanks;

Leo

Ive got the Intel DQ67EP board with the Intel 82579LM onboard NIC.  Ive got the machine running Windows7 64bit.  Ive got this problem where randomly it drops from Gigabit to 10Mbps and will never negoiate back to gigabit.  I can disconnect the cable, reconnect it, dont work.  I can plug that same cable into another machine like my Lenovo T420 laptop, and it has no issues connecting gigabit, so I know its not the cable, or port, or Hub.  However still plugged into a different port of the hub, still dont work.  Plugged it into a different hub, still dont work, still keeps sitting at 10Mbps.

Ive rebooted it, still negoiates at 10Mbps.  Shut the PC down, wait 1min, turn it on, still sitting at 10Mbps.  So at this point dont believe its driver.  I have the latest 16.5 running on the Windows.

ONLY way I can get this working is one of two ways.  I have to unplug power, not just shut it down.  I need to kill power from the board entirely.  Wait 10secs, then plug it back in.  Then upon starting up, its set to gigabit with no issues.  Other way is to change a setting in Bios which when you exit/save it causes it to kill power to the board for a second.  So the fact that killing power to the board fixes it, tells me its some hardware or firmware level issue, clearly not the driver.

Now to explain when it happens, I do have the machine set to sleep and wake at certain times.  Most of the time it sleeps fine, wakes up fine and still sits at Gigabit.  Theres no explanation on how many times it takes before it decides to go into some stuck state of only negoiating at 10Mbps.  Even going into Device Manager and setting it to 100Mbps, or 1000Mbps, Half or Full duplex does nothing.  It disconnects the Link and Reconnects but only sits at 10Mbps.  Im normally connected via the IntelAMT via RealVNC.

Ive updated from the 0054 bios to 0055 last week so Im also on the latest Bios revision.

What causes this to get in such a stuck state that only killing power to the board fixes this?

Dixit

I Wonder if there is possibility to connect two servers directly (without switch or switches) with use of 2x Intel x520-DA2 10Gb Network adapters and Intel Ethernet SFP+ Twinaxial Cable XDACBL3M. Anybody has experience with similar configuration?

Hi i'm using this adapter for an industrial application and the two ports is wired directly to two other pc:s. It's working fine however every now and then (maybe once a week) the connection is lost between one port of the EXPI9402PT and one pc. The connection seems to be completely dead as the leds of the adapter stops flashing. A simple reboot of the comuter fixes this issue! It is very imortant that this connection runs at 1gbit all the time so the connection speed of the card is set so. The system is running windows xp and i dont know exactly what version of the driver is yet. (will find out later)

I haven't had any chance to investigate further as the operators reboots the computers as soon as this problem occurs.. But is this a known issue? Should i replace the card with some other model??

Edit: It can of course be the integrated network of the other pc's mobo. I have a couple of intel PRO/1000 GT desktop on order to try it out. I will also have to check if it's heat related. Do you have any other suggestions of what i can try? I can try to replicate the problem by doing a stress test and then try to find out which card is locking up...?

Any thoughts on below, when try to make install  ixgbe-3.22.3 src? thanks!

make install

make -C /lib/modules/2.6.39-400.214.3.el5uek/build SUBDIRS=/tmp/ixgbe-3.22.3/src modules

make[1]: Entering directory `/usr/src/kernels/2.6.39-400.214.3.el5uek'

  CC [M]  /tmp/ixgbe-3.22.3/src/ixgbe_main.o

In file included from /tmp/ixgbe-3.22.3/src/ixgbe_osdep.h:38,

                 from /tmp/ixgbe-3.22.3/src/ixgbe_type.h:66,

                 from /tmp/ixgbe-3.22.3/src/ixgbe_dcb.h:29,

                 from /tmp/ixgbe-3.22.3/src/ixgbe.h:48,

                 from /tmp/ixgbe-3.22.3/src/ixgbe_main.c:51:

/tmp/ixgbe-3.22.3/src/kcompat.h:3593: error: redefinition of typedef ânetdev_features_tâ

include/linux/netdevice.h:985: error: previous declaration of ânetdev_features_tâ was here

make[2]: *** [/tmp/ixgbe-3.22.3/src/ixgbe_main.o] Error 1

make[1]: *** [_module_/tmp/ixgbe-3.22.3/src] Error 2

make[1]: Leaving directory `/usr/src/kernels/2.6.39-400.214.3.el5uek'

make: *** [default] Error 2