I've been trying to troubleshoot this issue now for months on and off and have gotten nowhere.
It seems that WOL is broken when using this hardware under Windows 10.
I've been using the Windows 10 driver that installs by default (version 12.155.22.6 dated 4/5/2016) and have not been able to find a different one (latest ProSet software doesn't contain a driver for this adaptor).
I've set everything up that various internet threads I've read have said to do, this includes:
BIOS:
Enable the adaptor (duh)
Enable Remote Wake Up
Disable Low Power Mode
Windows:
Disable Fast Startup
Make sure, under the Power Management tab, that all the boxes are checked.
There are no properties for "Waking" in Advanced Properties for the adaptor so I can't set them, nor is there a PME Event Property to check/change.
---
I know that WOL is possible for this machine because I popped in a PCI NIC and got WOL to work on that NIC, but this integrated adaptor just won't comply.
Lot's of threads out there saying it can be done, but I can't seem to do it on my hardware.
Here's a capture from BOOTUTIL showing that WOL is supposed to work...
---
C:\Intel22.4.0.1\APPS\BootUtil\Winx64>BOOTUTILW64E.EXE
Intel(R) Ethernet Flash Firmware Utility
BootUtil version 1.6.40.1
Copyright (C) 2003-2017 Intel Corporation
Port Network Address Location Series WOL Flash Firmware Version
==== =============== ======== ======= === ============================= =======
1 0024E819DC99 0:25.0 Gigabit YES FLASH Not Present
---
One suggestion I found was to update the boot agent (mine is 1.3.81) to the latest (1.5.something) and then throw a flag in the boot agent setup that supports WOL.
However, I do not think I can update the boot agent as BOOTUTIL says there's no flash firmware present to do so, or correct me if I'm wrong.
Ideas on how to update the boot agent?
Aside from that any other ideas?