Clik here to view.
Flow Director configuration not working
Hi:I am using the i40e_4.4.0 driver for XL710 Network Card. Currently, I am trying to loopback the connections. For this purpose, I had to set the two ports on promiscuous mode. Thus, using my...
View ArticleClik here to view.
Re: Intel 82579V drops connection every hour on windows 10
I encountered the same Problem.Additional Information:before 23.07.17 the system worked properly with windows 10 64 home.in the eventlog of the Adapter i can find an update from 23.07.17 22:23.Since...
View ArticleClik here to view.
XL710 Malicious Driver Detection Event Occured
Hello, I've got some abnormal event in XL710 like as below. 헤더 1kernel: i40e 0000:03:00.0: Malicious Driver Detection event 0x02 on TX queue 12 PF number 0x00 VF number 0x00kernel: i40e 0000:03:00.0:...
View ArticleX710-4 NVM Tool Reports "Update not found"
Hi, I have several X710-DA4 that I purchased at different times, and some of them I was able to grab the latest firmware (5.05) and upgrade them. nvmupdate64e and ethool show this on the good ones:...
View ArticleClik here to view.
Intel X710-DA4 / VMware ESXi 6.5u1 - Malicious Driver Detection Event Occured
Hello, we're having problems with an Intel X710-DA4 retail card on VMware ESXi 6.5u1. After some time (usually minutes to hours) of sustained traffic on the NIC, we're seeing the following in...
View ArticleClik here to view.
What SFP transceivers are supported by i350-F2/i350-F4?
I have looked, but had been unable to locate the answer to this most basic of questions regarding these popular Intel gigabit fiber server NICs. The i710 10G fiber NIC supports several different...
View ArticleXL710 NVM v5.0.5 - TX driver issue detected, PF reset issued &...
I've been having issues with TX driver issue detected, PF reset issued and fail to add cloud filter for quite some time across 12 VMware ESXi v6.0 hosts. About once a week the result is a purple screen...
View ArticleIntel X710-DA4 / VMware ESXi 6.5u1 - Malicious Driver Detection Event...
I can't even get a VM to boot when I use the i40en driver v1.3.1 under ESX v6.0u2. As soon as I power on a VM the system crashes with Malicious Driver Detection and all traffic stops. I've had to fall...
View ArticleRe: SR-IOV with IXGBE - Vlan packets getting spoofed-kernal 4.4.77 ixgbe 5.2.1
I have the same problem with kernel 4.4.77, ixgbe driver version 5.2.1 and ixgbevf 4.2.1. OS ALT Linux. Spoof cheking was disabled, but no ping in two VM with the same vlan.dmesg host:[162311.173561]...
View ArticleClik here to view.
Re: X710/X557-AT Malicious Driver Detection Event Occured-can disable in the...
Hi, I am also encountering this issue (4-port card). X710/X557-AT 10GBASE-T : FW: 5.05 Any ideas? Can the feature be disabled in the driver?
View ArticleClik here to view.
X710 Flow director issues on Linux
Hello all, I am not able to setup Flow Director to filter flow type ipv4. It did not seems to have this issue when flow type is specified as tcp.Its on Linux(4.9.27), freshly download driver off...
View ArticleXL710 Stops Receiving Packets After a Particular PPPoE Packet
HI Everyone, We are using XL710 hardware on Linux 4.1.20 kernel. We have an issue where the following behavior is noticed. When we send a simple loop back traffic to the XL710, it works fine. When a...
View ArticleClik here to view.
Re: SR-IOV with IXGBE - Vlan packets getting spoofed-using 82599ES in...
Hi Sharon and Pratik, I have the exact same need - I have an 82599ES-based SR-IOV setup using a Mirantis Fuel 9.2 OpenStack deployment where I am trying to pass VLAN-tagged packets out of a KVM VM...
View ArticleClik here to view.
Intel(R) Ethernet Connection (2) I219-V whats with the (2)?
I have an Asus Z170 Pro Gaming motherboard with the I219-V LAN port but even on a fresh Windows 7 or Windows 10 installation, the port always shows up as having the (2) prefix even though its the only...
View ArticleClik here to view.
Enabling 802.1q tagging for I218-LM on Win10 Enterprise (aka Anniversary...
Hi Folks, Working with VMWare Workstation Pro on an x64 Win10 enterprise machine (10.0.14393) (aka Redstone 1 or Anniversary Edition), attempting to get output from different VMs onto different .1q...
View ArticleClik here to view.
Having WOL problems with an Intel 82567-LM3 adaptor on a Dell OptiPlex 760...
I've been trying to troubleshoot this issue now for months on and off and have gotten nowhere.It seems that WOL is broken when using this hardware under Windows 10.I've been using the Windows 10 driver...
View Articleproblem of installing the igb-5.3.3.10 driver
hello all： I am receiving the follwoing error when I installed the igb-5.3.5.10 [ 2617.676535] igb 0000:04:00.0: The NVM Checksum Is Not Valid[ 2617.702549] igb 0000:04:00.1: The NVM...
View Articlex550-t1/2 Windows Server 2012 R2 driver
I was looking at picking up a few x550-T2 Ethernet adapters. Driver support for Windows Server 2012 R2 is confirmed on these pages:Intel® Ethernet Controller X550-AT Product SpecificationsIntel®...
View ArticleClik here to view.
Flow Director configuration not working
Hi:I am using the i40e_4.4.0 driver for XL710 Network Card. Currently, I am trying to loopback the connections. For this purpose, I had to set the two ports on promiscuous mode. Thus, using my...
View ArticleUDP packets frozen with at least I219-V, I219-LM and I217-LM
Hello, I am new to this community. I subscribed to ask a question here because I am really stuck.My company makes electronic devices that use UDP 100 MB Ethernet communication with a PC (under Windows...
View Article