Hi all
i got a Maximus VII Impact with a bug on RJ45. The motherboard look good but the RJ45 is in "CODE 10" in Windows manager. I try many solutions but no one done. It's the i218-v component.
Solution 1 : Unplug all power cable and unplug the cmos battery => no effect
Solution 2 : Put Boot as normal in motherboard bios => no effect
Solution 3 : Disable rj45 in bios / boot / reboot / enable rj45 in bios / reboot => no effect
Solution 4 : Disable rj45 in Windows manager / reboot / enable rj45 in Windows manager / reboot => no effect
Solution 5 : Update rj45 in Windows manager => no effect because the rj45 is in "CODE 10"
i read there is a litlle tool named UPL Tool, tool able to flash the rj45 rom. I need it to try if i can repair this rj45 slot.
perhaps it will have no effect but i have to try on my motherboard. If anyone have other solution i'll appreciate a lot.
Kind Regards