Have issues trying to update
I have completed a scan on the Driver and support assistant and it has come back as no updates available. I find this hard to believe as the Ethernet Connection I219-V is showing the driver date...
View ArticleIntel(R) Ethernet Connection I217-LM does not work on 1Gbps speed
hello, I have a HP ZBook 15 laptop, where the "Intel(R) Ethernet Connection I217-LM" device is used for wired Ethernet. I also have two GO-SW-8G Dlink Gigabit switch...
View ArticleClik here to view.
IGB/E1000 : Watchdog bite/ crash while network performance measurement test.
Hi, I am using network performance measurement tool nuttcp with IGB and E1000 cards on one of my development boards. Issue: Observed crash/watchdog bite using testing with both IGB and E1000...
View ArticleClik here to view.
i40e x710 4x10G card not working anymore with DAC
Using an updated driver, I cannot seem to get my interfaces up. Looks like the driver is not allowing the NIC to work due to the SFP+ module type, which worked previously on my Debian Stretch host....
View ArticleHelp setting up ANS
I am trying to set up VLANs on one of our PCs. That PC is based on a DG33FB motherboard with a 82566dc-2 NIC running Windows 10. The properties of the NIC show VLAN and Priority enabled but I unable to...
View ArticleCannot PXEboot with Intel X710 NIC (pxe structure was not found in UNDI...
Hello, I've been having trouble with this NIC not booting off of PXE. I've already set the 10Gbe interface as a booting interface in the BIOS. During PXE, I get the error message: PXE structure was...
View ArticleClik here to view.
BSOD Intel X710
Hello I have a strange problem, I have an X710-DA4 card that works very well on a hp ProLiant DL380 Gen9 serverin 2012 r2 Intel (R) Xeon (R) CPU E5-2620 v3 @ 2.40GHz The card has a strange behavior...
View ArticleXL710 nvm update fails with "Access Error"
I've seen this posted on the forum a number of times, but there has been no posted solution. i have two know good 710 based network cards that have had their SPI flash chip replaced with a blank one....
View Articleintel i40 firmware for XL710 NIC
Hi, under the firmware version info, what does all three fields indicates.i think first one is firmware version, second one is ETrakID, What does the third field indicate ? driver: i40eversion:...
View ArticleAuto-negotiation always off on OL7.3 Linux with "X710 for 10GbE SFP+"
Hello, The full product name is: Ethernet controller: Intel Corporation Ethernet Controller X710 for 10GbE SFP+ (rev 01) I have a weird problem. My Intel card always shows Auto-negotiation : off . 1)...
View ArticleDoes xl710 supports windows 2016?
Hi , Can anyone tell me xl710 support win2k16? thanks,mashime
View ArticleClik here to view.
how many vf for xl710?
Hi Dan, Thank you for the information. Can you tell me how many VFs are supported by XL710? thanks,mashime
View ArticleClik here to view.
Using Virtual Functions in OVS switches
Hi, I am using SR-IOV on an i350 interface on a Linux machine and, even though I mainly need Virtual Functions (VFs) in PCI-passthrough mode, I would also like to be able to use VFs as regular...
View ArticleClik here to view.
Programming Flash for 82574
Hi, we have been redirected here from this thread in the embedded community: ARM tools for 82574 |Embedded Community To summarize the important parts of our previous discussion, we have an Intel...
View ArticleClik here to view.
How can I install iSCSI boot on Intel/DELL PRO 1000 PT Dual Port
Vendor: 8086 DevID: 105E C57721-005 PS C:\Intel23.2\APPS\BootUtil\winx64> .\bootutilw64e -IVIntel(R) Ethernet Flash Firmware UtilityBootUtil version 1.6.59.0Copyright (C) 2003-2017 Intel...
View ArticleNetwork Connections Install Wizard Frozen / Ethernet Is Gone
Hey guys! Recently built a new PC. Haven't had any issues, but all of a sudden my Ethernet port stopped working today. My on-board wifi works fine, and I tried a different cable (which didn't work), so...
View ArticleClik here to view.
Access Error after NVMUpdatePackage on X710-DA2 .
Hi , We upgraded firmware of X710-DA2 (EtrackID was added into .cfg file ) and after that card shows access error , how to recover it ? Server : ProLiant DL380 Gen10 OS : 14.04.1-Ubuntu ,...
View ArticleClik here to view.
Intel(R) Ethernet Connection (7) I219-V isn't working?
I recently got a new mobo, and upon installing win 10, i discovered the driver mentioned in the title (Intel(R) Ethernet Connection (7) I219-V) is not functioning properly.It has no connection what so...
View ArticleClik here to view.
XL710 and ethtool loopback
Hi I'm trying to set a local or remote loopback to my adapter.this is the result /i40e-2.4.10/src$ sudo ethtool -t enp1s0f0 external_lbThe test result is FAILExternal loopback test was not executedThe...
View Articlexl pci-detach failure when using 82599 NIC
Hi, I’ve come across a need to hotplug PCI devices between dom0 and domU using SR-IOV NIC. But I'm experiencing problems when trying to detach VF more than one PV guests. I can attach VF to DomU...
View Article