Re: x710 network link is disconnected
We are having a very similar issue with our Intel X710 based NIC's, that seemed to start happening out of the blue. We are running a Hyper-V cluster based on Dell R730 servers, and recently as we have...
View ArticleWhy log message printed "e1000e 0000:0f:00.0: eth2: Reset adapter unexpectedly"
Hi all,why my linux system server sometime printed "e1000e 0000:0f:00.0: eth2: Reset adapter unexpectedly" on log message,did any one have seen that before?Wired Ethernetkernel version:Linux...
View ArticleWhat does the VM misbehavior code 0x18000000 represent?
Hi! I am using latest IGB driver(5.3.5.3) for Intel I350-T2 adapter. Enabled IOMMU, created two VFs ('modprobe igb max_vfs=2'), and added the first VF as a passthrough device to a guest VM.Installed...
View ArticleI210 Windows Driver Source code
Hi, We're developping software that runs under Windows Embbeded Standard and hardware using Intel I210 controler.We require low-level access driver to be able to control TX timestamps or IPG in order...
View Articlei210 bridging interface problem
Hi, I am developer on Linux system. I have develop network tunnel with bridging interface. I found problem in throughput performance. It looks like serial packet. From bandwidth monitoring, i can...
View ArticleClik here to view.
Release of 10GB Ethernet drivers for Windows Server 2016
Hello, now that Windows Server 2016 is in general availability, when can we expect to have a stable driver release for Windows Server 2016? The TP5 beta drivers are not very stable. thanks!
View ArticleCan we retrieve digital diagnostic info from INTEL SFP+/NIC X520 from OS?
I would like to be able to issue a command from LINUX to retrieve transmitted optical power, received optical power. Is there any Intel software utility to get that info?
View ArticleWhy LnkSta and LnkCtl show different with X710?
Hi, My lspci -vvv output for the X710DA4 Ethernet Adapter shows LnkSta to be 8GT/s but LnkCtl is 2.5GT/s. Motherboard used is the S2600CW with dual E5-2697Av4 CPU. Thanks....
View ArticleX520-DA1 or X520-LR1 with Intel SFP+ extremely slow speed ...
I have two DELL PCs each installed Intel X520-DA1 with SFP+ (FTLX1471D3BCV-IT) and using single mode fiber to connect two PCs directly, on Windows 7 ultimate 64bit the adapter linked as 10Gbps, but...
View ArticleIs Intel DDIO Technology available for i7-6900k Broadwell-e processor?
Is Intel DDIO Technology available for i7-6900k Broadwell-e processor? or is it available only on xeon processors?
View ArticleClik here to view.
Intel Ethernet Connection I219-V disconnect
Hi, my lan cable connection is disconnecting/reconnecting every few minutes. It's not internet problem since WiFi works fine. I've updated the drivers to latest, re-install from board cd, still the...
View ArticleX710 DCBX with Juniper EX4500
Hello all, We have newly installed Intel X710 NICs on Windows Server 2012 R2 connecting to a Juniper EX4500 with DCBX enabled. The Juniper DCBX information for the interfaces show enabled and...
View ArticleWhat does the VM misbehavior code 0x18000000 represent?
Hi! I am using latest IGB driver(5.3.5.3) for Intel I350-T2 adapter. Enabled IOMMU, created two VFs ('modprobe igb max_vfs=2'), and added the first VF as a passthrough device to a guest VM.Installed...
View ArticleAfter 09.14.16 windows update I get intel 82578dc gigabit network connection...
After 09.14.16 windows update I get intel 82578dc gigabit network connection error, with no connection to network. When I revert back all is good. Any solutions?
View ArticleAfter passing some traffic getting error tx_burst failed at lcore(1), port (0)
Hello Experts, I am facing problem with one of my application with DPDK. Please find belowdetails of my setup, Host - Ubuntu 14.04 with KVM-QEMU(4.2.0-27-generic) 64 bitGuest - Ubuntu...
View ArticleWhat's the difference between i350-T2 and i350-T2v2?
Hello, Can anyone please help me figure out what the difference between i350-t2 and i350-t2v2? The specs look exactly the same.
View ArticleI211/I217-V Windows 10 LACP teaming fails
Hello, after the update to Windows 10 (x64, Build 10240) the creation of a teaming group (static or IEEE802.3ad) with a I211+I217-V NIC fails. Drivers have been upgraded to the latest version available...
View ArticleMultiple 82574L Initialize failures
According to the spec update multiple 82574L controllers have an SMBus address conflict." 7. SMBus ARP Fails with Multiple Devices Because Different UDIDs Collide " I'm guessing this is the reason that...
View ArticleXL710-QDA2 directly connect two computers - no switch, is this possible?
I have two computers, each with a XL710-QDA2, currently running Windows Server 2016 Tech Preview 5.Is it possible to directly connect these two with the QSFP+ cable?This does not seem to be working for me
View ArticleCan we retrieve digital diagnostic info from INTEL SFP+/NIC X520 from OS?
I would like to be able to issue a command from LINUX to retrieve transmitted optical power, received optical power. Is there any Intel software utility to get that info?
View Article