i219-v limit to 10mbps
Hello,I've installed a new PC with Windows 10 Prox64 on M/B Gigabyte H170M-D3H. The ethernet adapter is intel ethernet connection i219-v. Current drivers are 12.15.23.1. The problem appeared with...
View ArticleSudden issue with 82579V on ASUS P8P67-D
Hello, I hope this is the right place for this, my apologies if not. A few days ago my internet connection began to fail by beginning a loop of: Network cable unplugged, Enabled, Identifying..I...
View Articlei210 bridging interface problem
Hi, I am developer on Linux system. I have develop network tunnel with bridging interface. I found problem in throughput performance. It looks like serial packet. From bandwidth monitoring, i can...
View ArticleIBIS Model i218LM
Hi, I'm looking for the Ibis model for the i218LM. Could you provide me the link to where this ibis model resides? Thanks,--Lisa
View ArticleI219-V and Windows Server 2012 / 2016
Does the latest Intel driver for I219-V support Windows Server 2012 and Windows Server 2016? I have an Intel NUC6i5SYH with I219-V gigabit Ethernet and discovered that the Intel Ethernet driver...
View ArticleEthernet AVB setup
Hi,I am trying to create an Ethernet AVB demo setup with the following configuration: 1. Talker running in a PC, with i210 - source code taken from Open AVB in Github - Linux 14.042. Listener running...
View ArticleHow to enable JTAG port on i210?
Hi, We are struggling to get the JTAG chain working on WGI210. Do we need to set some pins at a particular level before we can activate this? Is there a defined startup sequence needed for this?...
View ArticleIntel i217LM or Intel i211AT Rapid Spanning Tree and Teaming support?
Does either one of the Network interfaces support RSTP and Teaming? Thank you.
View ArticleLatest driver for 82583V not installing
Hi, I tried to do the latest driver update for the Intel 82583V Gigabit Ethernet controller (version 21.1 date 10/11/2016), but after the update I checked the driver and it displayed version 12.7.28.0...
View ArticleNetwork not working with Centos 7 install and e1000e driver
I have a fresh install of centos 7 on an asrock z97 extreme4 motherboard and I am having major networking issues. When I first start the network the connection is fast and works great but only after...
View ArticleI211/I217-V Windows 10 LACP teaming fails
Hello, after the update to Windows 10 (x64, Build 10240) the creation of a teaming group (static or IEEE802.3ad) with a I211+I217-V NIC fails. Drivers have been upgraded to the latest version available...
View ArticleI210 TX/RX hang
Hi, I'm using the I210 with 3.14.26-rt22 kernel and igb driver 5.2.15.During a stress test, after ~10-15 hours I receive NETDEV WATCHDOG timeout.It seems that the RX FIFO had overrun scenario, but it...
View ArticleRelease of 10GB Ethernet drivers for Windows Server 2016
Hello, now that Windows Server 2016 is in general availability, when can we expect to have a stable driver release for Windows Server 2016? The TP5 beta drivers are not very stable. thanks!
View ArticleIntel x520-T2 DCB problem
Hello.I cann't set dcb on mode from dcbtool in CentOs 7.lldpad daemon is running.Kernel is compiled with "CONFIG_DCB=y" flag. Some ethtool information.# ethtool -i enp1s0f0driver: ixgbeversion:...
View ArticleWired ethernet failed on Ubuntu 12.04 LTS with Intel 82579LM / Intel 82574L
Fresh install of Ubuntu 12.04 LTS desktop on my workstation. I haveEth0 Intel 82579LM Gigabit Network ConnectionEth1 Intel 82574L Gigabit Network Connection Installed the latest (3.3.3) drivers...
View Articleintel nic drivers 19.3 huge 6000+ dpc latency spike once a few secs
hi, i would like to report that the new intel nic drivers version 19.3 that just released recently has huge 6000+ dpc latency spike once in a few secs. my specs Intel(R) 82579LM Gigabit Network...
View ArticleWhy LnkSta and LnkCtl show different with X710?
Hi, My lspci -vvv output for the X710DA4 Ethernet Adapter shows LnkSta to be 8GT/s but LnkCtl is 2.5GT/s. Motherboard used is the S2600CW with dual E5-2697Av4 CPU. Thanks....
View ArticleX540-T2 Port0/1 not detected when Cat6 cable is attached to Port1
I have noticed that when I connect Cat6 cable to port1 none of the both ports are detected, if I connect Cat6 cable to port0 I was able to see both ports (0 & 1). Please let me know if you have any...
View ArticleSudden issue with 82579V on ASUS P8P67-D
Hello, I hope this is the right place for this, my apologies if not. A few days ago my internet connection began to fail by beginning a loop of: Network cable unplugged, Enabled, Identifying..I...
View ArticleI219-V and Windows Server 2012 / 2016
Does the latest Intel driver for I219-V support Windows Server 2012 and Windows Server 2016? I have an Intel NUC6i5SYH with I219-V gigabit Ethernet and discovered that the Intel Ethernet driver...
View Article