LACP capable dual port expresscard (win10)
Target Os:Win10 Target Hw:Dell M4800. I'm looking to get higher network throughput. I'm currently topping out @ ~120MB/S. with internal gigabit ethernet. I have an LACP switch and Nas Server with 4GB...
View ArticleClik here to view.
Intel Ethernet Drivers Causing High DPC Latency
Hello, I am currently running a z170 Asus Deluxe motherboard with an overclocked 6700k. I recently found that my Ethernet drivers are causing large spikes resulting in pops and clicks which is making...
View ArticleHow i can to update firmware in Intel E1G42ET (chip Intel 82576)?
Where i can to find firmware for Intel 82576? If i upgrade Boot Agent with bootutil or ibabuild BootAgent version is change, but if a see version of firmware with ethtool -i eth3 version of firmware...
View ArticleServer Network adapter
I have an interest in two network adapter products;1) Intel Manufacturer product # PWLA8391, single port 1Gb ethernet network adapter which wholesales for $262) Intel Manufacturer product # E1G42ETBLK,...
View ArticleIs there a Windows 10 driver for Intel(R) 82578DC? I have no internet after...
Is there a Windows 10 driver for Intel(R) 82578DC Gigabit Network Connection? I have no internet access after upgrading from Windows 7 to Windows 10.
View ArticleClik here to view.
Intel(R) 82583V Drivers not installing on Windows 10 Pro x64
Hello, I'm trying to install the latest network drivers for my Asus Crosshair V Formula-Z but I keep getting this message:This happens with the latest drivers from both Intel and Asus. Is there any way...
View ArticleClik here to view.
I211/I217-V Windows 10 LACP teaming fails
Hello, after the update to Windows 10 (x64, Build 10240) the creation of a teaming group (static or IEEE802.3ad) with a I211+I217-V NIC fails. Drivers have been upgraded to the latest version available...
View ArticleClik here to view.
X710: DCB (PFC - priority flow control) problem
Hi All, We have 16 X710 NICs on our different servers. We require to enable PFC (priority flow control) on a specific VLAN priority (like priority #5) on all of the NICs. However, the X710 handles lldp...
View ArticleClik here to view.
Installed a EXPI9302CT Network Adapter - What causes "Connection Status:...
I have a Dell Vostro with Intel Quad 4 i3 processor. It has Win pro 7 (64-bit). The wired network adapter failed and so I replaced it with an Intel EXPI9301CTBLK (82574). With the new network...
View Articlex710 Teaming, vlan, SR-IOV and Hyper-v 2012 R2
HI all, I'm looking for a best practice or config advice. We have new Dell Servers and Compellent iSCSI storage. The servers have x710 net adapters and have 2 ports 10G coax to Nexus switch trunk...
View ArticleX540-T2 problem since latest Windows Server 2012 R2 Update
I was updating a base server with the X540T2 card, and noticed that I lost remote access as the updates started to install. I went to teh physical server, and found that the NIC was no longer connected...
View ArticleClik here to view.
Is it supported to mix a DAC/TwinAx cable and an SFP+ module on the same dual...
I have X520 cards ( 1 integrated and 1 PCI) in a dell R730.. each are dual port On both cards, one port has a 3m dell DAC cable installed and working fine in the 2nd port of each card I have tried to...
View ArticleXL710 VLAN tag stripping in a VF.
I have an XL710 VSI that is running in a VF. I have added a vlan filter for a tag of '2' to my vsi using the I40E_VIRTCHNL_OP_ADD_VLAN message. The vsi is the default one created by the PF driver when...
View ArticleVLAN creation on Windows 10 Enterprise TP
Hello, there. This morning I upgraded my fully functionnal Windows 8.1 Enterprise installation to Windows 10 Technical Preview. Before that, I downloaded the Intel Network Adapter Driver from this...
View ArticleX710-DA4 UEFI Oprom Error after firmware update
I had an issue where, after booting, linux would sometimes only see 3 interfaces rather than the usual 4.In an attempt to fix the issue, I have updated the card to the latest firmware using the EFI nvm...
View ArticleClik here to view.
ixgbe: link flapping on two directly connected servers with 82599ES adapter
Good time. We experince link flapping while connecting two supermicro servers with 82599ES adapters: [Wed Jan 6 07:10:14 2016] ixgbe 0000:81:00.1 enp129s0f1: NIC Link is Down [Wed Jan 6 07:10:15...
View ArticleXL710 VF and loopback
I have an XL710 VSI that is running in a VF and uses RSS queuing across multiple queues on input. In fact there are 4 RSS queue sets in the VF. For various reasons I want to put frames on each XMIT...
View ArticleIXLV710 - Configure VF to receive ALL packets
I have an XL710 VSI that is running in a VF. Is it possible to configure the VF or accompanying host PF in such a way that the VF driver receives all frames received by the NIC?
View ArticleClik here to view.
Intel X710 Supported Uplinks and Operating Systems
I've recently managed to get access to an Intel X710-DA2 card and for the meantime I am using this in a high end desktop PC. It will likely move to another server in the future but for now I'm testing...
View ArticleClik here to view.
intel nic drivers 19.3 huge 6000+ dpc latency spike once a few secs
hi, i would like to report that the new intel nic drivers version 19.3 that just released recently has huge 6000+ dpc latency spike once in a few secs. my specs Intel(R) 82579LM Gigabit Network...
View Article