Intel X710 and Dell FTLX8571D3BCL Copper SFP+ Module
Hi Sandy_IntelMy name is Dung, i am from Viet Nami just buy Intel® Ethernet Converged Network Adapter X710-DA2 but i can't use thisplease support me. I just buy 2 SFP+ is Dell FTLX8571D3BCLI connect...
View Articleethtool shows only rx_queue_0_packets/bytes counter for ixgbe driver v 4.1.5
ethtool (latest version) only shows rx_queue_0_packets/bytes queue counter even though ixgbe is loaded with default parameters and allocated 16 receive queues. All queues are getting used nevertheless...
View ArticleX710 Jumbo Packet doesn't work after reboot
We are trying to setup a new Hyper-V cluster on Dell PE730 with X710-DA4 cards. I have the cards in NPAR+EP mode so we get 4 nics per port. I'm trying to setup the 4 partitions as follows:Partition 1...
View ArticleX540-T2 problem since latest Windows Server 2012 R2 Update
I was updating a base server with the X540T2 card, and noticed that I lost remote access as the updates started to install. I went to teh physical server, and found that the NIC was no longer connected...
View ArticleIntel I218-V - slow transfers FROM gigabit capable devices
I have a desktop (1) PC with a Asus z97 Pro (wifi ac) motherboard and Intel I218-V NIC running Windows 8.1 Pro. I’ve been using it over Wifi, but recently ran a cable to it to get better transfer...
View ArticleIntel 82566DC Network Adapter Questions
Greetings: I have a Dell PC desktop running Win 10 and it has a Intel 82566DC Gigabit Network Adapter. Questions: 1. My current driver version is 9.13.41.3. Is this the latest version. If not can...
View ArticleClik here to view.
I211/I217-V Windows 10 LACP teaming fails
Hello, after the update to Windows 10 (x64, Build 10240) the creation of a teaming group (static or IEEE802.3ad) with a I211+I217-V NIC fails. Drivers have been upgraded to the latest version available...
View ArticleNew to Intel
Intel, Can anyone help me with how can I start with IoT I have only Application knowledge. I am a PHP coder.No knowledge on Android app. can hire someone for the same, but before for hardware related...
View ArticleIXLV710 - Configure VF to receive ALL packets
I have an XL710 VSI that is running in a VF. Is it possible to configure the VF or accompanying host PF in such a way that the VF driver receives all frames received by the NIC?
View ArticleA problem with igb-5.3.2.tar.gz driver (linux kernel 2.6.5)
Source:igb-5.3.2.tar.gzOS:Linux **** 2.6.5-7.308-smp #1 SMP Mon Dec 10 11:36:40 UTC 2007 x86_64 x86_64 x86_64 GNU/LinuxLog make:*****:~/src # *****:~/src/igb-5.3.2/src # make install/bin/sh: line 1: [:...
View ArticleInstalled a EXPI9302CT Network Adapter - What causes "Connection Status:...
I have a Dell Vostro with Intel Quad 4 i3 processor. It has Win pro 7 (64-bit). The wired network adapter failed and so I replaced it with an Intel EXPI9301CTBLK (82574). With the new network...
View ArticleClik here to view.
SR-IOV 82599 Virtual Function cannot have more than 4 RX/TX queue pair
Hypervisor: RHEL 7.0 KVM and ESXi 5.5Hardware HP Blade Server BL 460 with Intel Mezzanine with two 82599 port. Did setup SR-IOV and was not configure a virtual function to have more than 4 queue pair...
View ArticleAuto MDIX with fixed speed
Hi all,I have trouble with a 82574 Ethernet Controller when setting a fix speed and duplex mode.The controller supports Auto-MDIX for all speeds, but if I disable AutoNeg and set tthe speed fix to 100...
View ArticleClik here to view.
PCI Fehlermeldung ??
Ich habe das Board 35DP35 und WIN 10 -64 bit installiert. Im Gerätemanager taucht der Fehler "PCI- Kommunikationscontroler (Einfach)" auf. Ein passender Treiber wird nicht gefunden. Auch das "Intel(R)...
View ArticleNeed help configuring X710-DA2 with Cisco SFP-10G-SR SFP module
Hello, I am trying to test that I can send and receive traffic on my X710-DA2 NIC - I am using CentOS 7 - Usingethtool -p p1p1 successfully lights the LEDs associated with the p1 connectionethtool -p...
View ArticleProblem upgrading the firmware on XL710 card
Hello!I've seen a thread about firmware update and tried both versions of NVMUpdate mentioned there , but neither tool detects my card (ignore X540 one) [root@server ~/intel_firmware/XL710_1.0]$...
View ArticleClik here to view.
Intel 82579LM Gigabit Network device cannot start (Code 10)
Dear all, We are frequently experienced that Intel 82579LM Gigabit Network device cannot start (Code 10) on Windows Embedded XP SP3 after regular and graceful shutdown.The issue cannot resolve via...
View ArticleOnboard I217-V extremely slow upload transfer speeds - Windows 10 PC
Hello,I have an onboard I217-V network adapter in my ASUS Z87 SABERTOOTH motherboard and I'm running Windows 10 Pro x64 (version 1511). Everything was working perfectly until one day I noticed that...
View ArticleI218-V and I219-V LED Status
I am currently using two separate boards with integrated I218-V and I219-V network adapters, hard wired through CAT6 cables to a switch. When the I219-V machine is in S4/S5 sleep the link LED on the...
View Articleintel nic drivers 19.3 huge 6000+ dpc latency spike once a few secs
hi, i would like to report that the new intel nic drivers version 19.3 that just released recently has huge 6000+ dpc latency spike once in a few secs. my specs Intel(R) 82579LM Gigabit Network...
View Article